Arabesque Necklace & Earrings

Arabesque Necklace & Earrings

Crafting Time:
  • Under 1 Hour
Skill Level:
  • Intermediate
Project Courtesy of: Jolee's Jewels
Print Project Description Download Project PDF Add to Project List

Additional Information



  • Jolee's Jewels:
  • Smooth clover pendant, Light Azure
  • Four 6mm bicone beads, Aquamarine
  • Six 6mm bicone beads, Crystal
  • Four 4mm bicone beads, Aquamarine
  • Four 4mm bicone beads, Crystal
  • Cousin:
  • 18"silver curb chain
  • 14 silver headpins
  • Silver jump ring
  • Round-nose & chain-nose pliers
  • Wire cutters


Begin constructing the necklace by creating the dangles. Eyepin Loops are needed to make the dangles. Layout the placement of the drops and attach them to the pendant & chain.


  1. Thread one each 6mm Aquamarine & 4mm Crystal bicone beads onto a headpin, close with an eyepin loop (make 4). Thread one 6mm Crystal & 4mm Aquamarine bicone beads onto a headpin, close with an eyepin loop (make 4). Thread one 6mm Crystal bicone bead onto a headpin, close with headpin loop (make 4); one 6mm Aquamarine (make 2); one 4mm Crystal (make 2); one 4mm Aquamarine (make 2).
  2. Attach one each 6mm Aquamarine & 4mm Crystal dangle to the center loop inside the pendant. Attach another 6mm Aquamarine & Crystal dangle to the bottom center loop of the pendant.
  3. Attach one each 6mm Crystal & 4mm Aquamarine dangle to each of the remaining bottom loops of pendant.
  4. Thread the pendant onto the chain.
  5. Plan the placement of the single bicone bead dangles to the chain on both sides of the pendant. Attach the dangles to the chain.


  1. Thread crystal bead onto headpin.
  2. Use the chain nose pliers to bend the wire to 90ş angle.
  3. Use wire cutter to trim headpin wire to 1/2" from the bend.
  4. Use the round-nose pliers to grip the end of the wire & bend it to form a loop.
  5. If making a connector, simply start with an eyepin and finish with an eyepin loop.