DIY Pallet Art
Beckie from Infarrantly Creative here with a confession: I have a scrap pile in my garage that I would be embarrassed to take a picture of. I could make 100 of these and still not touch my scrap pile. I have a scrap wood hoarding problem. So why throw it away when I can toss it in a bin of scraps? Every once in a blue moon I get a wild hair and have to use up some of my scraps just so I have confidence that they are still useful. Weathered wood is so on trend right now as are pops of colors. I married the two and they had a pallet art weathered and bright love child. Isn’t she pretty?
• Plaid FolkArt Ultra Dye: Blue Bayou, Rendezvous, Tantalizing Teal, and Turquoise
• Foam brushes
• Scrap wood
• Wood glue
• Table saw or circular saw and straight edge
• Chop saw
• Air nailer
• Electric sander
1. I grabbed all sorts of wood from my garage. Some were old fence posts, others were new pine boards, and some were some leftover deck boards. I started cutting them at a 45-degree angle and came up with a random pattern. It is kind of like putting a puzzle together.
2. I found another piece of scrap 3/4” OSB board that was about 12” x 30” and thought that would be a good size for my pallet art.
3. I laid the pattern on top of the OSB making sure all the pieces would fit in.
4. I started by gluing and nailing the pieces into place staining the new wood as I went.
5. I stained the new pieces with some Folk Art Ultra Dye in various shades of blue. Don’t be afraid to mix the dye to come up with fun new shades. Once they were dry I took an electric sander to them to distress and mute the colors a bit.
6. Once dry I glued and nailed them in place and just keep adding color as I saw fit.
7. You will have a lot of overhang and will need to trim it down. You can use a circular saw to cut the extra off or you can use a table saw like I did.
8. Next, I framed it would with new pine boards ripped to 2” wide on my table saw. Again I let it dry and then sanded it. Then I added a different shade of the Ultra Dye and sanded that down to give it a depth of color.
Using wood glue, I air nailed the frame in place as well.
9. You can add O-rings on the back to hang it on the wall. Or you can set it on a shelf upright or on its side. It is sooooo pretty with the blues/greens and the gray weathered wood. SWOON!
For now, I just propped it against a wall in my family room but plan on finding the perfect place in my home to showcase it.
I have seen some amazing patterns using this technique. It is kind of like quilting with wood. The Ultra Dye gives it color but also allows you to see the wood tones.
For more pallet project click below to be taken directly to the post: