SUPPLIE S& TOOLS:
FloraCraft® Make It: Fun® Foam:
FloraCraft Smooth Finish®
Chalk Paint: Charcoal and White
Acrylic Paint: Flat Black
4” Gathered Lace: Black and Grey
1” Gathered Lace: Black
Crochet Thread: Black
(4) Thin Wood Dowels
Duct Tape: White
(4) Chenille Stems: Black
Jeweled Accessory Picks
(16) Pony Beads: Black
Make It: Fun ® Foam Cutter or Serrated Knife
Low-Temp Glue Gun and glue sticks
Spatula or Small Putty Knife
Paint Brushes: 1” Flat and Fine Detail Brush
1.Use spatula or putty knife to apply a coat of Smooth Finish® to two 2.5” balls for the heads. Tip: Use a craft stick inserted into the ball as a handle. Let first coat dry and sand lightly. Apply a second coat, let dry and lightly sand again.
2.Paint the smooth balls white. Paint the 3” balls grey for the bodies. Cut a small flat spot off the bottom of the remaining 2.5” ball and paint black for the spider. Set aside to dry.
3.Insert the other end of the craft stick from the heads into the top of the bodies and glue in place.
4.Pin the 4” gathered lace around the top of the bodies. Pin pleats in the lace as you go to create ruffles. Pin the 1” black lace around the necks in the same way.
5.Wrap a generous amount of black thread around your hand or an object that is about 4 ½” across. Tie a knot through the center to gather. For the grey skeleton, tie a small bun in one end of the loops and then cut the opposite side of the loops to create a tassel. For the black skeleton, loop the string the same way. Tie together then cut the loops apart and tie off the ends for pony tails about 1.5” up from each end.
6.Cut eight 6” lengths of wood dowel using the wire cutters. Cut eight 6” strips of white duct tape and wrap around the dowel to cover. Break the dowels to create the elbows and knees. Glue a black pony bead to the end of each dowel for the hands and feet. Glue the arms and legs into the bodies.
7.Glue the hair to the heads and glue on jeweled accessory embellishments. Positioning the hair first gives you a guide for where to paint the face. Paint on the face and let dry. You can first lightly draw the face in pencil and then trace with paint.
8.Paint the spiders face using the white paint and let dry. Cut the black chenille stems in half. Glue a pony bead to one end of each of the eight stem pieces for the spider’s feet. Glue the legs into the sides of the spider. Pin a piece of black lace around the spider’s waist to finish. Display skeletons with treat jars.
SHIPPINGShipping your purchase is easy at JOANN! Orders typically leave our warehouses within 1-3 business days (Mon-Fri). Delivery date depends on the destination address and the shipping method. You’ll receive an email with tracking information when your order is shipped.
RETURNSReturns can be made for FREE in any of our stores.