Images

Crystazzi Rainbow Necklace
Reset

Crystazzi Rainbow Necklace

Crafting Time:
  • 3-5 Hours
Skill Level:
  • Advanced
Project Courtesy of: Cousin
Print Project Description Download Project PDF Add to Project List

Additional Information

Description
< p>SUPPLIES & TOOLS:

  • Crystazzi crystals:
  • Four 8mm global crystal
  • Six 9x6mm oval crystal
  • Six 6x6mm cubes dark sapphire
  • Crystazzi 4mm bicone crystals:
  • 4 light sapphire
  • 7 peach
  • 8 indigo
  • 12 each topaz, erinite
  • 17 dark sapphire
  • Crystazzi 6mm bicone crystals:
  • 3 each olivine, topaz
  • 4 aqua
  • 7 indigo
  • 10 jonquil
  • Crystazzi 8mm round crystals:
  • 1 each erinite, olivine
  • 3 each jonquil, peach
  • 4 dark sapphire
  • 7 each aqua, topaz
  • Eight 5mm wheel spacers
  • 3 small bead caps
  • 1 set small rope toggle
  • 4 crimps
  • 32 flat 25mm headpins
  • 47 round 3mm beads
  • 47 open 4mm jump rings
  • 6" oval link chain
  • Silver beading wire
  • Ruler
  • Round, needle-nose or crimping pliers

DIRECTIONS:

  1. Cut two 1" lengths of chain.
  2. Cut two 12" pieces of beading wire. Use a crimp to attach each wire to one half of the toggle clasp.
  3. Thread onto each strand: 4mm bicone topaz, 6mm bicone jonquil, 8mm round topaz, 6mm bicone jonquil, 4mm bicone topaz, 3mm round silver, 4mm bicone peach, global crystal, 4mm bicone peach, round silver, 4mm bicone topaz, 6mm bicone jonquil, 8mm round topaz, 6mm bicone jonquil, 4mm bicone topaz, round silver, 6mm bicone indigo, round silver, 4mm bicone erinite, 8mm round aqua, 4mm bicone erinite, round silver, 4mm bicone indigo, oval crystal, 4mm bicone indigo, round silver, 4mm bicone erinite, 8mm round aqua, 4mm bicone erinite, round silver, 4mm bicone indigo, round silver, 4mm bicone light sapphire, oval crystal, 4mm bicone light sapphire, round silver, 6mm cube light sapphire, round silver, global crystal, round silver, 6mm cube light sapphire, round silver, 4mm bicone light sapphire, oval crystal and 4mm bicone light sapphire.
  4. Finish each strand using a crimp bead to attach it to the last link of a 1" chain.
  5. Cut a 26-link length of chain. Use jump ring at the ends of the 1" chains to attach it to the top link of the 4" chain,forming the basic "Y" section of the necklace.
  6. Create dangles for the 1" side chains. Make 2 of each of the following dangles. Thread a round silver, a 4mm bicone light sapphire, and a round silver bead onto a headpin and finish with a wrapped loop. Thread an 8mm round dark sapphire and a round silver bead onto a headpin and finish with a wrapped loop. Thread a 4mm bicone dark sapphire, a jump ring, a cube, a jump ring and a 4mm bicone light sapphire onto a headpin and finish with a wrapped loop. Use a jump ring to attach the dangles to the 1" chains in the same order as they were created, starting with the first link (next to the crimped side) and placing a charm on every other link until they are all used. Refer to photo.
  7. The first link of the 4" length is bare. The second link down will have a dangle on both sides and from then on every link has a single dangle. Alternate which side to hang the dangles. 26 dangles with wrapped top loops will be needed. Arrange the remaining crystals and silver beads in small groups of 1-3 beads. Lay out to create a graduated color change from darker to lighter color. Attach each dangle using a jump ring.
Reviews
Crystazzi Rainbow Necklace is rated 3.0 out of 5 by 1.
Rated 3 out of 5 by from Pretty...but This necklace is very pretty and I would love to make it, except that the file is "forbidden".
Date published: 2009-07-30
  • y_2016, m_12, d_10, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_P240330, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_joann
CUSTOMERS ALSO VIEWED