Images

Ella
Reset

Ella

Crafting Time:
  • Over 5 Hours
Skill Level:
  • Advanced
Project Courtesy of: Cousin
Print Project Description Add to Project List

Additional Information

Description

SUPPLIES & TOOLS:

  • Cousin ® Rhinestone Connectors (9 pk)
  • Cousin ® Rhinestone Beads (3 pk)
  • Cousin ® 6mm White Glass Pearls (2 pk)
  • Cousin ® Silver Ball chain (2 pk)
  • Silver Lobster Claw Clasp (1 pc)
  • Silver 4mm Jump Rings (34 pc)
  • Silver 6mm Jump Ring (1 pc)
  • Silver Eye Pins (330 pc)
  • Round Nose Pliers
  • Needle Nose Pliers
  • Wire Cutters

 

 

DIRECTIONS:

  1. Make (16) rhinestone bead links.
  2. Using 4mm jump rings, alternate linking together 17 rhinestone connectors and the 16 rhinestone beads.
  3. Attach a lobster claw clasp to one end of the linked section using a 4mm jump ring. Attach a 6mm jump ring to the other end of the linked section using a 4mm jump ring.
  4. Make (284) 6mm pearl links. Connect the pearl links together into the following lengths (2) 17-link, (2) 22-link, (2) 26-link, (2) 34-link and (2) 43-link sections.
  5. Cut the following lengths of ball chain: (2) 9-1/4”, (2) 11-1/8”, (2) 14-1/2” and (2) 18-1/4”.
  6. Attach the 17-link pearl strands to the rhinestone bead links that are located on both sides of the 5th rhinestone connector at each end of the linked section from step 2. Attach the strand to the outside loops of the bead links.
  7. Attach the 22-link pearl strands to the outside loops of the 4th and 6th rhinestone connectors at both ends of the linked section.
  8. Attach the 26-link pearl strands to the rhinestone bead links that are located next to the 4th and 6th rhinestone connectors at both ends of the linked section. Attach the strand to the inside loops of the bead links.
  9. Attach the 34-link pearl strands to the inside loops of the 3rd and 7th rhinestone connectors at both ends of the linked section.
  10. Attach the 43-link pearl strands to the rhinestone bead links that are located next to the 3rd and 7th rhinestone connectors at both ends of the linked section. Attach to the inside loops of the links.
  11. The ball chain attaches to the linked section created in step 2. Open a jump ring and rest the first ball of the chain to one side of the jump ring and the second ball to the other side of the ring. Once the jump ring is closed, the ball will not slide through. This is why 4mm jump rings are required to complete the project.
  12. Attach the 9-1/4” chain to the jump rings after the 4th and before the 6th rhinestone connector. Repeat this at the other end of the linked section. The ball chain falls between the 17 link pearl strand and the 22 link strand.
  13. Attach the 11-1/8” chain to the jump rings before the 4th and after the 6th rhinestone connectors. Repeat this at the other end of the linked section. The ball chain falls between the 22 link and the 26 link pearl strands.
  14. Attach the 14-1/2” chain to the jump rings after the 3rd and before the 7th rhinestone connector. Repeat this at the other end of the linked section. The ball chain falls between the 26 link and the 34 link pearl strands.
  15. Attach the 18-1/4” chain to the jump rings before the 3rd and after the 7th rhinestone connector. Repeat this at the other end of the linked section. The ball chain falls between the 34 link and the 43 link pearl strands.
  16. Make (31) 6mm pearl links and (4) rhinestone bead links.
  17. Connect the links into the following lengths: 7-link pearl section, 3 pearls/1 rhinestone/1 pearl/1 rhinestone/1 pearl/1 rhinestone/3 pearls-link section and 8 pearls/1 rhinestone/8 pearls-link section.
  18. Attach the 7-link section to the outside loops of the rhinestone bead link on both sides of the 9th rhinestone connector (the center of the jewelry piece).
  19. Attach the 11-link section to the inside loops of the 8th connector and the 10th connector.
  20. Attach the 17-link section to the inside loops of the rhinestone bead links next to the 8th and 10th connectors.
Reviews
CUSTOMERS ALSO VIEWED