Images

Green Paisley Block Quilt
Reset

Green Paisley Block Quilt

Crafting Time:
  • Weekend Project
Skill Level:
  • Some Experience Necessary
Project Courtesy of: Jo-Ann Fabric & Craft Stores

Additional Information

Description
QUILT
SUPPLIES & TOOLS:
  • Quilter’s Showcase fabrics, 1 1/4 yd each:
    Scroll: Lime on navy
    Stripes Dots: green/navy/yellow on white
    Damask: Navy/lime on white
    Line Dot: Navy/yellow/lime on white
    Paisley: Navy/yellow on lime
  • 3/4 yd fabric for binding
  • 4 yds fabric for backing
  • 60"x76" batting
  • Sewing machine, basic sewing, quilting supplies
  • Iron, pressing surface

DIRECTIONS: Refer to photo. Use 1/4" seam allowance throughout. WOF = Width of Fabric. RS = Right side(s). WS = Wrong side(s).
1. From each of the 5 fabrics, cut two 12 1/2"xWOF strips. Subcut each strip into 8 1/2" x 12 1/2" rectangles for a total of 45 rectangles.

2. Lay out the rectangles. Each column is stitched with the 8 1/2" ends together. Odd columns consist of 2 rectangles. Even columns are stitched with five 8 1/2" x 12 1/2" rectangles & an 8 1/2" x 6 1/2" rectangle at each end. Arrange larger rectangles, then cut the top and bottom rectangles as needed. Stitch short sides of rectangles together to make a column. Make 4 columns of six 8 1/2" x 12 1/2" rectangles and 3 columns of two 8 1/2" x 6 1/2" rectangles and five 8 1/2" x 12 1/2" rectangles.

3. Stitch columns together.

4. Piece backing as needed for a 60"x76" rectangle.

5. Layer quilt top, batting and backing. Quilt as desired.

6. Cut seven 2 3/4" x WOF strips from binding fabric. Stitch short ends together. Fold WS together & long sides even. Press. With raw edges even, stitch binding to quilted piece. Turn binding to WS and whip stitch in place.

PILLOW
SUPPLIES & TOOLS:
  • Quilter’s Showcase fabrics:
    1/4 yd Paisley: Navy/yellow on lime (A)
    1/4 yd Line Dot: Navy/yellow/lime on white (B)
    1/4 yd Scroll: Lime on navy (C)
    1/2 yd Damask: Navy/lime on white (D)
    1 yd fabric backing
    1/3 yd Stripes Dots: green/navy/yellow on white, binding
  • Sewing machine, basic sewing & quilting supplies
  • Iron, pressing surface

DIRECTIONS: 1/4" seam allowance. WOF = width of fabric. RS = Right side(s). WS = Wrong side(s).
CUTTING:
Fabric A: 6 1/2" x 12 1/2" rectangle for center
Fabric B: Two 2 1/2 x 12 1/2" rectangles
Fabric C: Two 2 1/2" x 10 1/2" rectangles
Fabric D: Two 6" x 16 1/2" rectangles; two 6" x 21 1/2" rectangles

ASSEMBLY:
1. RS together, stitch 1 Fabric B rectangle to each 12 1/2" side of center rectangle. Press seam allowances toward added pieces. Stitch 1 Fabric C rectangle to opposite sides of center pieced unit. Press.

2. Stitch each Fabric D rectangle to top or bottom side of center unit. Press. Set aside center unit.

3. To make pillow back, cut two 17 1/2" x 21" rectangles from backing fabric. Finish 1 short edge of each rectangle by folding 1/2", pressing and folding another 1/2". Press and stitch folded edge.

4. WS together, baste backing rectangles to pieced front, overlapping finished edges in center of pillow.

5. From binding fabric, cut three 2 3/4" WOF strips. Stitch short ends together. WS together & long edges even; press. With raw edges even stitch binding to basted pillow. Turn binding to back; whip stitch in place. Insert pillow form.

Round Pillow: Simplicity® 4108

Reviews