Images

Pearly Tassel Necklace and Earrings
Reset

Pearly Tassel Necklace and Earrings

Crafting Time:
  • 1-2 Hours
Skill Level:
  • Intermediate
Project Courtesy of: Jolee's Jewels
Print Project Description Download Project PDF Add to Project List

Additional Information

Description

SUPPLIES & TOOLS:

  • Jolee's Jewels:
    • 3 tassel set dangles, silver
    • Banana Leaf Connector, Crystal AB
    • Bicone Pearl Combos:
    • 14 white 6mm
    • 12 white 4mm
    • 11 crystal 6mm
    • 12 crystal 4mm
    • 6 crystal 5mm clear rondelles
  • Three 18" lengths of flexible stringing wire
  • 2 crimp tubes
  • 3 eyepins
  • Jump ring
  • 1 set ear wires
  • Lobster claw and split ring closure, silver
  • Pliers: chain-nose, round-nose
  • Wire cutters

DIRECTIONS:

EYEPIN LOOPS:

Thread bead onto headpin. Bend the wire to 90° angle. Trim headpin wire. Grip the end of the wire and bend to form a loop. If making a connector start with an eyepin and finish with an eyepin loop.

EARRINGS:

Make 2 simple pearl bead connectors for the earrings and assemble the 3 pieces together.

  1. Use an eyepin to create the pearl connectors: thread an eyepin with one 6mm pearl bead, close with an eyepin loop; make 2.
  2. Connect tassel to bottom loop of pearl connector. Connect ear wire to the top loop of the pearl connector. Repeat for the other earring.

NECKLACE - MAKE THE PENDANT:

  1. Use eyepin to create a pearl connector: thread eyepin with 6mm pearl bead, close with eyepin loop.
  2. Connect tassel to bottom loop of pearl connector.
  3. Connect jump ring to top loop of the pearl connector.
  4. Crimp the three stringing wires to the loop of the lobster claw closure.
  5. String 4mm pearl, bicone and pearl beads on the top and center stringing wires.
  6. String 6mm bicone bead on the center and bottom stringing wires.
  7. String 6mm pearl bead on the top and center stringing wires.
  8. String 4mm bicone, pearl and bicone beads on center and bottom stringing wires.
  9. String 6mm pearl, 5mm crystal rondelle and 6mm bicone beads on the top and center stringing wires.
  10. Thread 6mm pearl bead on the center and bottom stringing wires.
  11. Thread beads onto the stringing wires alternating the wires, pattern and sizes of the beads.
    Three 6mm beads and rondelles units on the stringing wires,
    6mm pearl to the top and center stringing wires,
    Center pendant on the three stringing wires,
    6mm bicone bead on the center and bottom stringing wires.
  12. Thread the beads on the stringing wires alternating the wires, patterns and sizes of the beads.
  13. After beads are threaded, crimp the strung wires to the split ring. Test crimps for security; trim free wire ends.
Reviews
CUSTOMERS ALSO VIEWED