Images

Reclaimed Chain Jewelry
Reset

Reclaimed Chain Jewelry

Crafting Time:
Under 1 Hour
Skill Level:
Some Experience Necessary
Project Courtesy of: Jo-Ann Fabric and Craft Stores

Additional Information

Description

SUPPLIES & TOOLS:

  • Safety pins
  • Metal beads
  • Crystal beads
  • 1/4” chain lengths with jump rings (3)
  • 16g brass wire
  • Color chain
  • Jump rings
  • Silver charms
  • Lobster clasp
  • Round nose pliers
  • Needle nose pliers
  • Wire cutters

DIRECTIONS:

Safety Pin Necklace
1. Open safety pins, add beads and close safety pins.
2. Connect safety pins to chain lengths to create a long necklace.

Safety Pin Bracelet
1. Open safety pin, add beads and close safety pin.
2. Connect the ends of the safety pin to 2 chain lengths.
3. Add lobster clasp and jump ring to close.
(Finished length should end up around 7-1/2”)

Safety Pin Love Bracelet
1. Open safety pins, add beads and close safety pins.
2. Connect safety pins using jump rings for 7”.
3. Add lobster clasp and jump ring to close.
4. Attach love charm to middle safety pin using jump ring.

Wire Heart Necklace
1. Create a 1” wide heart out of wire using chain nose pliers.
2. Slide 3 metal beads on 1 side of heart.
3. Measure and cut 15” of color chain.
4. Add jump rings to both sides of chain.
5. Attach 1 end of chain to the side of the heart beads.
6. Attach a lobster clasp to the other end and clasp to side of heart without beads.

Wire Heart Bracelet
1. Create a 1” wide heart out of wire using chain nose pliers.
2. Slide 3 metal beads on 1 side of heart.
3. Measure and cut 6” of color chain.
4. Add jump rings to both sides of chain.
5. Attach 1 end of chain to the side of the heart beads.
6. Attach a lobster clasp to the other end and clasp to side of heart without beads.

Charm Bangle Bracelet
1. Cut a 10” length of wire.
2. Form a 1/4” loop at one end and wrap around 3 times. Trim excess.
3. Create an 8” circumference circle.
4. Add beads and charms as desired.
5. Loop back open end and hook through hoop.

Reviews