Sapphire Stripes and Heart Top

Sapphire Stripes and Heart Top

Crafting Time:
  • 1-2 Hours
Skill Level:
  • Beginner
Project Courtesy of: iLoveToCreate
Print Project Description Download Project PDF Add to Project List

Additional Information



  • Tulip fabric-crafting products:
    • Large Glam-It-Up! Heart with Wings Iron-On Design
    • Fabric Spray Paint: Christmas Red, Sapphire
    • 3D Fashion Paint, Deep Red Slick
    • Dye Surface Cover
  • White T-shirt
  • 1/2"-wide masking tape
  • Paper towels
  • Iron, ironing surface
  • Pressing cloth
  • Washing machine & dryer


Read all instructions before beginning project. Refer to photo for color and design placement.

  1. Cover work surface with Tulip Surface Cover.
  2. Wash and dry shirt to remove sizing then iron smooth. Do not use fabric softener.
  3. Place shirt on covered surface. Add a strip of tape running vertically from top left shoulder to the bottom of shirt and close to the left edge. Add another strip 1" to 1-1/2" from first piece. Repeat step to create 2 stripes running across bustline and around each sleeve. Run a fingernail along tape edges to prevent paint seepage.
  4. Start Sapphire Fabric Spray Paint on paper towel then lightly spray over tape along edge and across bustline, spraying several light coats rather than one heavy coat to achieve clean edges. Spray Christmas Red on sleeves. Allow to dry. Carefully remove tape.
  5. Start flow of Deep Red Slick 3D Fashion Paint on paper towel using an even pressure on bottle for a smooth line. Create squares in the sections where stripes intersect. Allow to dry.
  6. Remove Heart with Wings Iron-On Design from package. Remove backing sheet. Position design pressing lightly to secure. Cover with pressing cloth & iron following package instructions.