Images

Serenity Hanging Leaf Necklace
Reset

Serenity Hanging Leaf Necklace

Crafting Time:
3-5 Hours
Skill Level:
Experience Necessary
Project Courtesy of: Soft Flex Company

Additional Information

Description

SUPPLIES & TOOLS:

  • Soft Flex® Beading Wire in Serenity Trio: Turquoise (12"), Fluorite (25"), Bone (12")
  • Blue Moon® copper leaf toggles (5)
  • 2x2mm crimp tubes (24)
  • 3mm crimp covers (24)
  • 3x3mm crimp tubes (2)
  • 4mm crimp covers (2)
  • Blue Moon® light green seed beads (1 strand)
  • Bliss® Beads 8mm crystal in green (10)
  • Darice® 8mm crystal in honey (4)
  • Darice® 3mm crystal in clear (12)
  • Blue Moon 10mm round green turquoise (4)
  • Crimping pliers
  • Cutters
  • Chain nose pliers

DIRECTIONS:

1. Use 13" of Fluorite beading wire to string a 2x2mm crimp tube and a toggle bar. Pass back through the crimp tube. Crimp the tube and trim off the extra wire. Cover the tube with a 3mm crimp cover. String 10 inches of seed beads, a 2x2mm crimp tube and a toggle bar. Pass back through the crimp tube. Crimp the tube and trim off the extra wire. Cover the tube with a 3mm crimp cover.
2. Use 12" of all three colors of beading wire to string one 3x3mm crimp tube and one leaf toggle. Pass all three wires back into the crimp tube. Crimp the tube and trim off the extra wire. Cover the tube with a 4mm crimp cover.
3. Use Fluroite beading wire to string a 2x2mm crimp tube. Crimp the tube 1-1/2" from the last crimp. Cover the tube with a 3mm crimp cover. String one seed bead, one turquoise bead, one seed bead and one 2x2mm crimp tube. Crimp the tube snuggly next to the bead. Cover the crimp with a 3mm crimp cover.
4. Repeat Step 3 three times, crimping 1/2" from the last crimp.
5. Use the Bone beading wire to string 2x2mm crimp tube. Crimp the tube 1/2" from the last crimp. Cover the tube with a 3mm crimp cover. String one seed bead, one 3mm crystal, one 8mm green crystal, one 3mm crystal, one seed bead and one crimp tube. Crimp the tube snuggly next to the bead. Cover the crimp with a 3mm crimp cover.
6. Repeat Step 5 five times, crimping 1/2" from the last crimp.
7. Use the Turquoise beading wire to string 2x2mm crimp tube. Crimp the tube 3-1/4" from the last crimp. Cover the tube with a 3mm crimp cover.
8. String one seed bead, one 8mm honey crystal, one seed bead, one leaf toggle (used as a pendant). Repeat this pattern two more times. Then, string one seed bead, one 8mm honey crystal, one seed bead and one 2x2mm crimp tube. Crimp the tube snuggly next to the bead. Cover the crimp with a 3mm crimp cover.
9. Use all three colors of beading wire to string one 3x3mm crimp tube and one leaf toggle. Pass all three wires back into the crimp tube. Crimp the tube and trim off the extra wire. Cover the tube with a 4mm crimp cover.

Reviews