Images

Serenity Necklace
Reset
Share:

Serenity Necklace

Crafting Time:
1-2 Hours
Skill Level:
No Experience Necessary
Project Courtesy of: Soft Flex Company
Share:
Share to Facebook Share to Twitter Pinterest More...

Additional Information

Description
>

SUPPLIES & TOOLS:

  • Soft Flex Trio .019 Serenity
  • 2x2mm Crimp Tube - 22 crimps
  • 3mm Crimp Covers - 22 covers
  • Pearls – 7 beads
  • 3mm crystals – 8 beads
  • Clasp
  • Crimping pliers
  • Chain nose pliers
  • Cutters
  • Bead stoppers

DIRECTIONS:

1. Use 24' of beading wire to string on crimp tube and one half of the clasp. Center the clasp in the middle of the wire and then pass back through the crimp tube again. Snug the crimp tube to the clasp and crimp. Cover the crimp tube with a crimp cover.
2. Pass each wire end through a crystal in opposite directions and slide the crystal to the center.
3. Pass each wire end through a crystal in opposite directions and slide the crystal to the center. The beading wire will create an oval shape that is 10mm x 12mm.
4. Repeat Step 3 four times.
5. Pass each wire end through a crystal in opposite directions and slide the crystal to the center. The beading wire will create an oval shape that is 13mm x 15mm.
6. Pass each wire end through a crystal in opposite directions and slide the crystal to the center. The beading wire will create a circle shape that is 20mm in diameter.
7. Repeat Step 5 one time.
8. Repeat Step 3 five times.
9. String both wires through a crimp tube. Crimp the tube and cut off one of the wires. Cover the crimp tube with a crimp cover.
10. String the remaining wire through a crimp tube and half the clasp. Pass back into the crimp tube and crimp. Cut off the excess wire and cover the crimp tube with a crimp cover.

Reviews