Images

Sorrento Ripple Shrug
Reset

Sorrento Ripple Shrug

Crafting Time:
  • Varies
Skill Level:
  • Intermediate
Project Courtesy of: Lion Brand
Print Project Description Add to Project List

Additional Information

Description

SIZE: About 21 x 59 in. (53.5 x 150 cm) not including fringe.

SUPPLIES & TOOLS:

  • Lion Brand® HEARTLAND®: #109 Olympic 4 balls or color of choice
  • LION BRAND® crochet hook size J-10 (6 mm)
  • LION BRAND® stitch markers
  • LION BRAND® large-eyed blunt needle
  • Scissors
  • Tape measure

GAUGE

1 ripple = about 4 in. (10 cm) measured from peak to peak.

BE SURE TO CHECK YOUR GAUGE

STITCH EXPLANATIONS

dc2tog (worked over more than 2 sts or sps)

Step 1: Yarn over, insert hook into first indicated st or sp and draw up a loop, yarn over and draw through 2 loops (first half of dc2tog complete);

Step 2: Yarn over, insert hook into 2nd indicated st or sp (you will be skipping st(s) in between) and draw up a loop, yarn over, draw through 2 loops (second half of dc2tog complete);

Step 3: Yarn over and draw through all 3 loops on hook (dc2tog complete).

dc3tog (dc 3 sts together) (Yarn over, insert hook in next st and draw up a loop, yarn over, draw through 2 loops) 3 times, yarn over and draw through all 4 loops on hook – 2 sts decreased.

dc4tog (dc 4 sts together) (Yarn over, insert hook in next st and draw up a loop, yarn over, draw through 2 loops) 4 times, yarn over and draw through all 5 loops on hook – 3 sts decreased.

dc7tog (dc 7 sts together) (Yarn over, insert hook in next st and draw up a loop, yarn over, draw through 2 loops) 7 times, yarn over and draw through all 8 loops on hook – 6 sts decreased.

NOTES

  1. Shrug is worked in one piece, with slits for armholes.
  2. An edging is worked around armholes and across long edges of completed Shrug.

SHRUG

First Half

Ch 63.

Row 1 (RS): Dc in 4th ch from hook (skipped 3 ch count as first dc) and in each ch across – you will have 61 dc at the end of Row 1.

Rows 2-4: Ch 3 (counts as first dc), turn, dc in next st and in each st across.

Rows 5 and 7: Ch 3 (does not count as a st), turn, sk first st, dc3tog over next 3 sts, *ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts; rep from * to last 9 sts, ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc4tog over last 4 sts – 5 ripples.

Rows 6 and 8: Ch 3 (does not count as a st), turn, sk first st, dc in first ch-1 sp, *(dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over next 2 ch-1 sps, rep from * to last 6 ch-1 sps, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over last ch-1 sp and last st.

Rows 9 and 10: Rep Row 2 – 61 dc.

Divide for Armhole

First Side

Row 1 (RS): Ch 3 (counts as first dc), turn, dc in each of next 40 sts, 2 dc in next st, place a marker in next st, leave marked st and remaining 18 sts unworked – 43 dc.

Row 2: Ch 3 (counts as first dc), turn, dc in next st and in each st across.

Rows 3 and 5: Ch 3 (does not count as a st), turn, sk first st, dc3tog over next 3 sts, *ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts; rep from * twice, (ch 1, tr in next st) twice, ch 1, work 2 tr in last st.

Rows 4 and 6: Ch 3 (counts as first dc), turn, (dc in next tr, dc in next ch-1 sp) twice, dc in next tr, *dc2tog over next 2 ch-1 sps, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr; rep from * twice, dc2tog over last ch-1 sp and last st.

Rows 7-10: Rep Row 2 – 43 dc.

Rows 11-14: Rep Rows 3-6.

Enlarge last loop to keep it from unraveling, and remove hook. Do not cut yarn.

Second Side

From RS, join a 2nd ball of yarn with a sl st in marked st, and work across other side of armhole as follows:

Row 1 (RS): Ch 3 (counts as first dc), dc in next st and in each st across – 19 dc.

Row 2: Ch 3 (counts as first dc), turn, dc in next st and in each st across.

Rows 3 and 5: Ch 4 (counts as 1 tr), turn, tr in first st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts, ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc4tog over last 4 sts.

Rows 4 and 6: Ch 3 (does not count as a st), turn, sk first st, dc in first ch-1 sp, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over next 2 ch-1 sps, (dc in next tr, dc in next ch-1 sp) twice, dc in each of last 2 sts – 19 sts.

Rows 7-10: Rep Row 2.

Rows 11-14: Rep Rows 3-6.

Fasten off.

Rejoin Work

Replace hook in enlarged loop, tighten loop, and work across both sides as follows:

Row 1 (RS): Ch 3 (counts as first dc), dc in each st to last st of first side, dc2tog over last st of first side and first st of second side, dc in each st across – 61 sts.

Rows 2-4: Ch 3 (counts as first dc), turn, dc in next st and in each st across.

Rows 5 and 7: Ch 3 (does not count as a st), turn, sk first st, dc3tog over next 3 sts, *ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc7tog over next 7 sts; rep from * to last 9 sts, ch 1, (tr in next st, ch 1) twice, (tr, ch 1, tr) in next st, (ch 1, tr in next st) twice, ch 1, dc4tog over last 4 sts.

Rows 6 and 8: Ch 3 (does not count as a st), turn, sk first st, dc in first ch-1 sp, *(dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over next 2 ch-1 sps, rep from * to last 6 ch-1 sps, (dc in next tr, dc in next ch-1 sp) 5 times, dc in next tr, dc2tog over last ch-1 sp and last st.

Rows 9-12: Rep Row 2 – 61 dc.

Rows 13-16: Rep Rows 5-8.

Rows 17-20: Rep Row 2.

Fasten off.

Second Half

From WS, join yarn with a sl st at corner, so that you are ready to work across opposite side of foundation ch.

Row 1 (WS): Ch 3 (counts as first dc), dc in next st and in each st across – 61 dc.

Beg with Row 2, work second half same as first half.

Note: When working second half, all odd-numbered rows will be WS rows and all even-numbered rows will be RS rows.

Fasten off.

FINISHING

Outside Edging

From RS, join yarn with a sl st at corner, so that you are ready to work across one long side edge of Shrug.

Row 1: Ch 1, work sc evenly across side edge – we worked about 170 sc, but you should work any number of sc to make a smooth edge.

Row 2: Ch 3 (counts as first dc), turn, dc in next st and in each st across.

Fasten off.

Rep outside edging across opposite side edge.

Armhole Edging

From RS, join yarn with a sl st at one corner of either armhole.

Rnd 1: Ch 1, work sc evenly spaced around armhole edge; join with sl st in first sc.

Rnd 2: Ch 3 (counts as first dc), turn, dc in next st and in each st to end of rnd; join with sl st in top of beg ch.

Fasten off.

Rep edging on opposite armhole.

Fringe

Cut 3 strands of yarn, each about 13 in. (33 cm) long. Hold strands together and fold in half. With crochet hook, draw the fold through edge of Shrug, forming a loop. Pull ends of fringe through this loop. Pull to tighten.

Make 31 fringes across each end of Shrug.

Trim fringe ends.

Weave in ends.

ABBREVIATIONS

beg = begin(ning)

ch = chain

ch-sp = chain space previously made

dc = double crochet

rep = repeat

rnd(s) = round(s)

RS = right side

sc = single crochet

sk = skip

sl st = slip stitch

st(s) = stitch(es)

tr = treble (triple) crochet

WS = wrong side

           

Every effort has been made to produce accurate and complete instructions.   We cannot be responsible for variance of individual knitters or crocheters, human error, or typographical mistakes.

©2014 Lion Brand Yarn Company, all rights reserved.

Reviews
CUSTOMERS ALSO VIEWED