Images

Square By Design® Table Runner
Reset

Square By Design® Table Runner

Crafting Time:
  • 3-5 Hours
Skill Level:
  • Intermediate
Project Courtesy of: Creative Pointe Designs, Made in the USA

Additional Information

Description

SUPPLIES & TOOLS:

  • Square By Design® Squares (3)
  • 3 yds 54” width fabric for borders & backing
  • Basic sewing supplies
  • Rotary cutter, cutting mat & ruler
  • Chalk for marking
  • Basic sewing supplies
  • Sewing machine
  • Finished size: 18" x 53"

DIRECTIONS:

    Note: Seam allowances are 1/4". Use dry medium iron.
  1. Centering motif, measure and cut each Square By Design® Square to 14-1/4" x 14-1/2".
  2. From backing/border fabric, cut one 4" x width of fabric strip. From this strip, cut two 14-1/2" pieces for middle borders. With right sides together, pin and sew one 14-1/2" border strip between each Square creating one long panel.
  3. From backing/border fabric, cut one 2-1/2" x width of fabric strip. From this strip cut two 2-1/2" x 14-1/2" strips. With right sides together, pin and sew a 14-1/2" strip to each short end of panel.
  4. Cut two 2-1/2" x width of fabric strips. With right sides together, pin and sew a strip on each long side of panel to complete the runner top. Trim edges to be even.
  5. From backing fabric, cut a piece to measure the same size as the runner top. Pin backing fabric to runner top, right sides together, and sew in place leaving an 8-10" opening in one short end for turning.
  6. Turn runner to right side through opening. Press opening edges inward.
  7. Top stitch around entire runner by sewing close to the fabric edge.
  8. Top Stitch 1/2" around each Square By Design® Square, pivoting at each corner.
  9. Trim threads and press.

Reviews
CUSTOMERS ALSO VIEWED