Images

Teal & Green Antique Bronze Jewelry
Reset

Teal & Green Antique Bronze Jewelry

Crafting Time:
  • Varies
Skill Level:
  • Intermediate
Project Courtesy of: Blue Moon Beads
Print Project Description
Add to Project List

Additional Information

Description

TEAL, GREEN AND ANTIQUED BRONZE MULTI-STRAND NECKLACE
SUPPLIES & TOOLS:

  • Blue Moon Beads®:
  • 2 pkg Green Glass Seed Beads
  • 2 pkg Teal Glass Seed Beads
  • 3 pkg Antique Bronze Glass Faceted Rondell Beads
  • 1 Antiqued Copper Two Strands Toggle Clasp
  • 2 Antiqued Copper Head Pins
  • 2½" Antiqued Copper Oval Links Chain
  • 14 Antiqued Copper Medium Oval Jump Rings
  • 12 Antiqued Copper Crimp Beads
  • 24 ft Tiger Tail
  • Wire cutters
  • Crimper pliers
  • Round-nose pliers

DIRECTIONS:
1. Cut twelve 24" lengths of Tiger Tail.
2. String Teal Glass Seed Beads along 18" of two Tiger Tail lengths.
3. Attach both Tiger Tail ends together to an Antiqued Copper Medium Oval Jump Ring on the one side using crimping technique.
4. Twist strands slightly, attach both Tiger Tail ends to another Antiqued Copper Medium Oval Jump Ring using crimping technique.
5. Repeat steps 2-4 two more times.
6. Twist all three beaded and twisted strands again then attach ending jump rings to the toggle clasp bar loops using jump rings.
7. String 19 Antique Bronze Glass Faceted Rondell Beads onto the middle of two Tiger Tail lengths together, then split ends and add equal amount of Green Glass Seed Beads onto all four Tiger Tail ends, making strand 18" length.
8. Twist seed beads strands on the both sides slightly, then attach both Tiger Tail ends together to the Antiqued Copper Medium Oval Jump Rings using crimping technique.
9. Repeat steps 7 and 8 two more times for 21 Antique Bronze Glass Faceted Rondell Beads and 13 Antique Bronze Glass Faceted Rondell Beads.
10. Attach all three ending jump rings on the one side of each Green Seed Beads and Bronze Rondells to the one loop of a toggle clasp using a jump ring.
11. Pass these twisted strands through the Teal Seed Beads strands loop, attach ends to another toggle clasp loop using Antiqued Copper Medium Oval Jump Ring.
12. Create a dangle by sliding 1 Antique Bronze Glass Faceted Rondell Bead onto a head pin, forming a simple loop.
13. Repeat step 12.
14. Cut two Antiqued Copper Oval Links Chain lengths: 1" and 1½".
15. Attach one chain length to the outer toggle clasp loop by opening ending chain link as a jump ring, then close.
16. Attach another chain length to the outer toggle clasp bar loop by opening ending chain link as a jump ring, then close.
17. Attach Antique Bronze Glass Faceted Rondell Bead dangles to the ending hanging clasp chains.

GREEN, TEAL, BRONZE AND COPPER BEADS DANGLING EARRINGS
SUPPLIES & TOOLS:

  • Blue Moon Beads®:
  • 2 Antique Copper Oval Beads
  • 6 Teal Glass Seed Beads
  • 6 Green Glass Seed Beads
  • 2 Antique Bronze Glass Faceted Rondell Beads
  • 4 Antiqued Copper Eye Pins
  • 12 Antiqued Copper Head Pins
  • 2 Copper Earwire
  • Wire cutters
  • Round-nose pliers
  • Flat-nose pliers

DIRECTIONS:
1. Create a connector by sliding 1 Antique Copper Oval Bead onto an eye pin, forming a simple loop.
2. Create a connector by sliding 1 Antique Bronze Glass Faceted Rondell Bead onto an eye pin, forming a simple loop.
3. Attach Antique Bronze Glass Faceted Rondell Bead connector to the earwire on the one side and to the Antique Copper Oval Bead connector on the other.
4. Create a dangle by sliding 1 Teal Glass Seed Bead onto a head pin, forming a simple loop.
5. Repeat step 4 for the two additional Teal Glass Seed Beads and 3 Green Glass Seed Beads.
6. Attach all six seed beads dangles to the Antique Copper Oval Bead connector bottom loop, alternating bead colors.
7. Repeat all steps to create a second earring.

GREEN, AQUA AND COPPER BEADS EARRINGS
SUPPLIES & TOOLS:

  • Blue Moon Beads®:
  • 16 Antique Copper Multifaceted Beads
    4 Antique Copper Round Eye Beads
    24 Teal Glass Seed Beads
    22 Green Glass Seed Beads
    2 Aqua Glass Large Flat Round Bead
    8" Copper Fine Chain
    14 Antiqued Copper Eye Pins
    46 Antiqued Copper Head Pins
    2 Copper Medium Oval Jump Rings
    2 Copper Earwire
  • Wire cutters
  • Round-nose pliers

DIRECTIONS:
1. Create a connector by sliding 1 Antique Copper Multifaceted Bead onto an eye pin, forming a simple loop.
2. Repeat step 1 two more times.
3. Connect all three connectors together into a beaded chain.
4. Repeat steps 1-3 one more time.
5. Cut two lengths of Copper Fine Chain: 1½" and 2½".
6. Create a focal Aqua Flat Round Bead element by sliding components onto an eye pin in the following order: 1 Antique Copper Multifaceted Bead, first link of a 1½" chain piece, 1 Antique Copper Round Eye Bead, 1 Aqua Glass Large Flat Round Bead, 1 Antique Copper Round Eye Bead, last link of a 1½" chain piece, 1 Antique Copper Multifaceted Bead.
7. Form a simple loop.
8. Open this focal connector eye pin loop and attach 2½" chain piece and 3 Antique Copper Multifaceted Bead chain pieces from steps 1-3, then close loops back.
9. Attach ending 3 Antique Copper Multifaceted Bead chain pieces connectors to the earwire, using jump ring.
10. Create a dangle by sliding 1 Teal Glass Seed Bead onto a head pin, forming a simple loop.
11. Repeat step 10 eleven more times for Teal Glass Seed Beads and eleven times for Green Glass Seed Beads.
12. Attach one Green Glass Seed Bead dangle to the earwire jump ring between two attached Antique Copper Multifaceted Bead connectors using a jump ring.
13. Attach 5 Teal Glass Seed Bead dangles and 4 Green Glass Seed Bead dangles to the hanging 1½" chain piece, distributing them with even distances and alternating colors.
14. Attach 6 Teal Glass Seed Bead dangles and 5 Green Glass Seed Bead dangles to the hanging 2½" chain piece, distributing them with even distances and alternating colors.
15. Repeat all steps to create a second earring.

GREEN, AQUA AND COPPER BEADS AND CHAIN BRACELET
SUPPLIES & TOOLS:

  • Blue Moon Beads®:
  • 1 pkg Green Flat Round Faceted Beads
    1 pkg Aqua Glass Flat Round Beads
    1 pkg Antique Copper Oval Beads
    1 pkg Teal Glass Seed Beads
    1 pkg Antiqued Copper Round Eye Bead
    1 Antiqued Copper Two Strands Toggle Clasp
    11 Antiqued Copper Eye Pins
    24" Antiqued Copper Oval Links Chain
    4 Antiqued Copper Medium Oval Jump Rings
    4 Antiqued Copper Crimp Beads
    28" Tiger Tail
  • Wire cutters
  • Crimper pliers
  • Round-nose pliers

DIRECTIONS:
1. Create a connector by sliding 1 Green Flat Round Faceted Bead onto an eye pin, forming a simple loop. Then repeat ten more times.
2. Connect all eleven connectors together creating a beaded chain.
3. Cut two 8" lengths of an Antiqued Copper Oval Links Chain.
4. Attach Green Flat Round Faceted Beaded chain and two Antiqued Copper Oval Links Chains together to the one loop of Antiqued Copper Two Strands Toggle Clasp on the one side and to the toggle clasp bar on the other using jump rings.
5. Cut 14" length of Tiger Tail.
6. Attach one Tiger Tail end to the jump ring using crimping technique.
7. Begin to string components onto this Tiger Tail in the following order: 2 Teal Glass Seed Beads, 1 Antiqued Copper Round Eye Bead, 1 Aqua Glass Small Round Bead, (1 Antiqued Copper Round Eye Bead, 1 Aqua Glass Small Round Bead, 1 Antiqued Copper Round Eye Bead, 1 Aqua Glass Big Flat Round Bead) x 5, (1 Antiqued Copper Round Eye Bead, 1 Aqua Glass Small Round Bead) x 2, 1 Antiqued Copper Round Eye Bead, 2 Teal Glass Seed Beads.
8. Attach Tiger Tail end to the other jump ring using crimping technique.
9. Cut 14" length of Tiger Tail.
10. Attach one Tiger Tail end to the same jump ring as a first strand, using crimping technique.
11. Begin to string components onto this Tiger Tail in the following order: (1 Teal Glass Seed Bead, 1 Antique Copper Oval Bead) x 10, 1 Teal Glass Seed Bead.
12. Attach Tiger Tail end to the second jump ring of an Aqua Beads strand using crimping technique.
13. Cut 8" length of an Antiqued Copper Oval Links Chain.
14. Attach this chain piece to the two beaded strands jump rings at the same time you attach it to the second loops of toggle clasp and bar.

TEAL, GREEN AND ANTIQUED BRONZE MULTI-STRAND BRACELET
SUPPLIES & TOOLS:

  • Blue Moon Beads®:
  • 1 pkg Green Glass Seed Beads
    1 pkg Teal Glass Seed Beads
    1 pkg Antique Bronze Glass Faceted Rondell Beads
    1 Antiqued Copper Two Strands Toggle Clasp
    2 Antiqued Copper Head Pins
    2½" Antiqued Copper Oval Links Chain
    6 Antiqued Copper Medium Oval Jump Rings
    6 Antiqued Copper Crimp Beads
    42" Tiger Tail
  • Wire cutters
  • Crimper pliers
  • Round-nose pliers

DIRECTIONS:
1. Cut one 14" length of Tiger Tail.
2. String Antique Bronze Glass Faceted Rondell Beads along 7½" of Tiger Tail, then attach ends to the jump rings on both sides using crimping technique.
3. Cut two 22" lengths of Tiger Tail.
4. Pass one Tiger Tail through a jump ring—what bronze beads are attached to—placing it on the middle of a Tiger Tail.
5. Pass both Tiger Tail ends together through a crimp bead, then secure this crimp bead as close as possible to the jump ring.
6. String Teal Glass Seed Beads along 7½" of each Tiger Tail end.
7. Twist both Tiger Tails slightly, then attach both ends to the jump ring on the other side of bronze beads strand, using crimping technique.
8. Repeat steps 4-7 for the Green Seed Beads.
9. Note: Weave Green Seed Beads twisted strands between teal and bronze beads strands simulating braiding before attaching the ends.
10. Attach each bracelet ending jump ring to the toggle clasp loops using two more jump rings on the each side.
11. Create a dangle by sliding 1 Antique Bronze Glass Faceted Rondell Bead onto a head pin, forming a simple loop.
12. Repeat step 10.
13. Cut two Antiqued Copper Oval Links Chain lengths: 1" and 1½".
14. Attach both chain lengths to the outer toggle clasp loop by opening ending chain link as a jump ring, then close.
15. Attach Antique Bronze Glass Faceted Rondell Bead dangles to the ending hanging clasp chains.

Reviews
CUSTOMERS ALSO VIEWED