Images

Triple Crown T-Shirt
Reset

Triple Crown T-Shirt

Crafting Time:
  • Varies
Skill Level:
  • Beginner
Project Courtesy of: Plaid Enterprises, Inc.
Print Project Description Download Project PDF Add to Project List

Additional Information

Description

SUPPLIES & TOOLS:

  • Simply Screen paint: Apple-tini, Oasis, Penny
  • Simply Screen silk screen stencil kit: Crown
  • Squeegee applicator: included with stencil kit
  • T-shirt
  • Masking tape
  • Paper towels
  • Parchment paper
  • Iron, pressing surface
  • Water

DIRECTIONS:

Refer to photo/pdf.

  1. Remove backing from silk screen stencil. Position on the top left of T-shirt. Mask the edges of the stencil so paint does not spill over onto the T-shirt. Squeeze a thick line of Apple-tini paint across top of design.
  2. Holding squeegee applicator at a 45° angle, using even pressure, pull a thin coat of paint evenly across the stencil design in a single downward motion. Continue until design is covered in a thin coat of paint.
  3. Remove & wash screen stencil. Blot dry.
  4. Repeat Steps 1 to 3 to place and adhere 2nd Crown on the bottom right side of the T-shirt and apply Penny Metallic paint. Allow painted Crown designs to dry completely, 1 to 2 hours.
  5. Repeat Steps 1 to 3 to place and adhere 3rd Crown in the center, slightly overlapping the other Crowns.
    Mask the edges of the stencil so paint does not spill over onto the T-shirt.
  6. Squeeze a thick line of Oasis paint across top of design. Holding squeegee applicator at a 45° angle, using even pressure, pull a thin coat of paint evenly across screen stencil design in a single downward motion. Continue until design is covered in a thin coat of paint.
  7. Allow printed design to cure for 24 hours.
  8. To heat-set, iron on cotton setting, no steam, using a pressing cloth or parchment paper for 30 seconds.
  9. To launder, hand wash in cold water after 72 hours. Line dry.
Reviews
CUSTOMERS ALSO VIEWED