Zola Shoulder Necklace

Zola Shoulder Necklace

Crafting Time:
  • 1-2 Hours
Skill Level:
  • Advanced
Project Courtesy of: Cousin
Print Project Description Add to Project List

Additional Information



  • Cousin®:
    Gunmetal Twist Chain (2 pk)
    Black Oval Chain (1 pk)
    Black Acrylic Lace Pendant (1 pk)
  • Black lobster claw clasp (3 pc)
  • Black 4mm jump rings (7 pc)
  • Black 6mm jump rings (3 pc)
  • Needle nose pliers
  • Wire cutters


1. Cut (1) 13" and (2) 10-1/2" lengths of black chain.
2. Slide the pendant onto the center of the 13" chain.
3. Using 6mm jump rings, attach the 10-1/2" chains to each end of the 13" chain.
4. Use a 4mm jump ring to attach a lobster claw clasp to one of the 10-1/2" chains. Attach a 6mm jump ring to the end of the other 10-1/2" chain.
5. Cut (2) 19-1/2" lengths of black chain.
6. Use 4mm jump rings to attach a lobster claw clasp to one end of each 19-1/2" chain.
7. Use 4mm jump rings to attach the other end of each 19-1/2" chain to the 10-1/2" chains. Attach them approximately 5-1/2" in from the end of each 10-1/2" chain.
The 19-1/2" chains will go under the arm and then attach onto the 6mm jump rings that connect between the 10-1/2" chains and the 13" chain.
8. Cut the following lengths of chain: (1) 6-1/2" gunmetal chain, (1) 8" black chain, (1) 8-1/4" gunmetal chain and (1) 10-1/2" black chain.
9. Use 4mm jump rings to gather the four chains together at each end. Gather the chains in order from shortest to longest.
10. Attach the jump rings to one of the 10-1/2" chains from step 3. Connect the jump rings two links away from where the 19-1/2" chains connect.
11. Repeat steps 8-10 for the other side of the shoulder necklace.