Be the Good the World Needs Infusible Ink Mug

SUPPLIES & TOOLS:_x000D_

_x000D_
• Infusible Ink™ transfer sheets
_x000D_
• StandardGrip Machine Mat, 12"x 12"
_x000D_
• Cricut Mug Press™​
_x000D_
• Heat-resistant tape (optional)
_x000D_
• Cricut® Ceramic Mug Blank
_x000D_
• Be the Good the World Needs SVG file
_x000D_

_x000D_ DIRECTIONS:
_x000D_ NOTE: This project uses Infusible Ink Transfer Sheets to create a custom mug. For best results, use a Cricut Mug Blank bearing the Infusible Ink compatibility badge.
_x000D_  _x000D_

_x000D_
• To download the SVG file, to load directly into Cricut Design Space click on the links below.
_x000D_
• Be the Good the World Needs Click Here
_x000D_

_x000D_ _x000D_

_x000D_
1. To begin, download the provided SVG file in supply list above. Upload it into your Cricut Design Space software and select all layers to resize the design to the size you need for your mug.
_x000D_
2. When you’re ready, select Make It, then mirror each layer.
_x000D_
3. Place Infusible Ink Transfer sheets shiny side down on mat, and follow the Design Space prompts to cut the images.
_x000D_
4. Remove unwanted pieces of the design, leaving the design on clear liner. At this point, you will want to layer the pieces of your design onto a clear liner.
_x000D_
5. Apply the layered design to your Cricut Mug blank, securing in place with heat-resistant tape.
_x000D_
6. Connect your Cricut Mug Press to your computer and a power source and turn in the machine to warm it up
_x000D_
7. Once Cricut Mug Press has reached pressing temperature, insert mug into press, and lower lever to start transfer.
_x000D_
8. After the beep, remove mug from press, only touching the handle of the mug, and place on a heat-resistant surface. Once completely cool, remove transfer sheet to reveal the design.
_x000D_

_x000D_