Best Mum Ever Keychain

by Cricut |

Item # 042217995P253

Beginner Under 1 Hour

SUPPLIES & TOOLS:_x000D_

_x000D_
_x000D_ DIRECTIONS:
_x000D_ NOTE:
_x000D_ Finished size leather keychain is approximately 2" (5 cm)_x000D_ _x000D_

_x000D_ Get project here
_x000D_
_x000D_
_x000D_ PREPARATION:
_x000D_ CUT:
_x000D_ ASSEMBLE:_x000D_

If you want to alter the project, select Customize, then use the tools in the Edit panel to make changes before you cut.
Place the leather facedown firmly onto the StrongGrip Mat by using hand pressure or a rolling brayer.
Be sure to Mirror the image when using iron-on and place the shiny side (clear liner) down on the StandardGrip Mat.
_x000D_ TIP: For help mirroring the mat, click the link below in the More Help section.

Follow the prompts in Design Space® to cut the images from the iron-on material.
Follow the prompts in Design Space® to cut the images from the leather.
Before removing your project from the machine, double check to make sure it's been cut all the way through. Perform another cut pass if necessary before unloading the mat.
Use a Weeder Tool to remove the negative pieces of iron-on so just your design remains on the clear liner.
Apply the iron-on layers to one side of the leather circle using a Cricut EasyPress™ Mini and Cricut EasyPress Mat with our Heat Transfer Guide, linked below, for the perfect time and temp settings.
TIP: If you have never used iron-on material, check out the links below in the More Help section.
_x000D_ Thread the leather portion through the keychain ring. Fold the completed leather piece in half over the ring and glue with wrong sides together using the contact adhesive instructions.

_x000D_