Blue Jewelry Set
ITEM # 3742819P178
Blue Jewelry Set
ITEM # 3742819P178
Print Description
Crafting Time:
1-2 Hours
Skill Level:
Intermediate

DESCRIPTION +

SUPPLIES & TOOLS:

  • Amethyst iris 4mm faceted round
  • Sapphire ceramic 8mm round
  • Beads stone sapphire 8mm round
  • Sapphire iris glass 6mm step faceted
  • Toggle
  • Crimp tube
  • Crimp beads
  • 22" tiger tail
  • Jump rings
  • Starchy cord
  • Head pins
  • Earring wire
  • Jewelry making tools

DIRECTIONS:

Necklace
First strand
1. Attach a 22" length of tiger tail to jump ring with 1 crimp bead. Enclose the short end of the wire within the first several beads.
2. Push the wire through the jump ring and the crimp tube then crimp.
3. String 1A, 1B, 1A, and 1C repeat 22 times.
4. Attach 1 crimp tube along with 1 jump ring. Push the wire through the jump ring and crimp tube and several beads; then crimp.
5. Cut the excess wire.
6. To finish attach the toggle.
Second strand
1. Attach a 22” length of tiger tail to jump ring with 1 crimp bead. Enclose the short end of the wire within the first several beads.
2. Thread A, C, A, D repeat 23 times and end on 1C, 1A.
3. Attach 1 crimp tube along with 1 jump ring. Push the wire through the jump ring and crimp tube and several beads; then crimp.
4. Cut the excess wire.
5. To finish attach the toggle.
Bracelet
1.
Cut about 20" length of starchy cord.
2. Cut the cord in two separate then knot together.
3. String 1B and push the two cord crisscross.
4. On one cord string 1A, 1C, 1A repeat on another cord.
5. String 1B and take another cord string on the same beads crisscross.
6. Repeat 11 times.
7. Tighten the beads together, make sure not too tight.
8. Knot the cord several times until all the beads securely stay.
9. Cut the excess cord.
Earrings
1.
On a head pin, place 1A,1C,1A and create a simple loop
2. Create another loop with 1C then close.
3. Place the previous loop with ear wire into the loop of the head pin and close it securely.

REVIEWS +

SUPPLIES & TOOLS:

DIRECTIONS:

Necklace
First strand
1. Attach a 22" length of tiger tail to jump ring with 1 crimp bead. Enclose the short end of the wire within the first several beads.
2. Push the wire through the jump ring and the crimp tube then crimp.
3. String 1A, 1B, 1A, and 1C repeat 22 times.
4. Attach 1 crimp tube along with 1 jump ring. Push the wire through the jump ring and crimp tube and several beads; then crimp.
5. Cut the excess wire.
6. To finish attach the toggle.
Second strand
1. Attach a 22” length of tiger tail to jump ring with 1 crimp bead. Enclose the short end of the wire within the first several beads.
2. Thread A, C, A, D repeat 23 times and end on 1C, 1A.
3. Attach 1 crimp tube along with 1 jump ring. Push the wire through the jump ring and crimp tube and several beads; then crimp.
4. Cut the excess wire.
5. To finish attach the toggle.
Bracelet
1.
Cut about 20" length of starchy cord.
2. Cut the cord in two separate then knot together.
3. String 1B and push the two cord crisscross.
4. On one cord string 1A, 1C, 1A repeat on another cord.
5. String 1B and take another cord string on the same beads crisscross.
6. Repeat 11 times.
7. Tighten the beads together, make sure not too tight.
8. Knot the cord several times until all the beads securely stay.
9. Cut the excess cord.
Earrings
1.
On a head pin, place 1A,1C,1A and create a simple loop
2. Create another loop with 1C then close.
3. Place the previous loop with ear wire into the loop of the head pin and close it securely.