SUPPLIES & TOOLS:
DIRECTIONS:
JOANN HACKS:
Please read and follow all manufacturers' instructions for all tools and materials used. Provide adult supervision if children participate in this project. Masks are not intended for hospital or medical use and are not OSHA certified. Please follow CDC guidelines for use of masks.
- Cotton Fabric – at least 12”X9”
- Lightweight Fusible Interfacing 12” X9”
- 1/4” Elastic
- Basic Sewing Supplies
DIRECTIONS:
- Download the pattern by clicking “download PDF” below Print Description on the right.
- Cut 1 pattern piece, on the fold, out of the cotton fabric and lightweight interfacing
- Apply fusible interfacing to wrong side of cotton fabric using an iron.
- Fold fabric right sides together, matching 9-inch (8-inch) sides.
- Sew along the 9 (8) inch side, using 1/4” seam allowance and leaving a space 3” wide in the center to turn mask right side out.
- Cut 2 pieces of elastic 7 inches long. Insert into the corners of the two open ends of the mask and pin into place. Sew across sides, backstitching well over the elastic, to secure the elastic in place.
- Turn mask right side out and press seams flat.
- Using pattern as a guide, fold up 3 pleats on each side, making sure the pleats are folded in the same direction. Pin into place.
- Top stitch around the entire mask, securing the pleats and closing the opening.
JOANN HACKS:
- Substitute elastic with 4- 16” Fabric Ties at each corner.
- Any light-medium weight, non-woven interfacing is appropriate for this project.
Please read and follow all manufacturers' instructions for all tools and materials used. Provide adult supervision if children participate in this project. Masks are not intended for hospital or medical use and are not OSHA certified. Please follow CDC guidelines for use of masks.