Camel Tie-Dye Sweatshirt

SUPPLIES & TOOLS:

• Rit All-Purpose Liquid Dye in Camel
• Cotton Sweatshirt
• ColorStay Dye Fixative
• Tie Dye Accessory Kit
• Wire Rack and Tray
• Measuring Cup
• Salt
• Gloves
• Plastic Table Cover
• Paper Towels
• Optional: Microwave

DIRECTIONS:

1. Cover work area with plastic table cover and have paper towels handy to protect against any possible spills. Gather supplies.
2. Before dyeing, remove any visible stains on the sweatshirt and pre-wash in warm soap water without any fabric softener. This helps to remove any finishes that may interfere with dye absorption.
3. Scrunch a section of the sweatshirt and secure with rubber bands. Repeat scrunching various sections of the fabric. With each section, vary the amount of fabric scrunched. Continue until majority of the fabric is scrunched. Now shape the fabric into a ball with more rubber bands.
4. Wearing rubber gloves, mix 2 tablespoons of well-shaken Camel liquid dye with two cups of hot tap water. Add 1 tablespoon of salt. Pour into a squirt bottle. Shake well.
5. Place sweatshirt on a baking rack with a tray under it. This keeps the dye from puddling under the fabric.
6. Squeeze dye onto fabric in random sections. Flip over and repeat.
7. If you are trying to achieve sections of white space, purposely leave certain sections of the fabric white and undyed.
8. To set the dye, do the following while the fabric is still tied up:
9. Apply Rit ColorStay Dye Fixative with a squeeze bottle, which will enhance the colors and reduce bleeding. Mix 2 tablespoons of well-shaken ColorStay Dye Fixative with water and apply liberally to both sides of the fabric.
10. We strongly recommend using your microwave, as long as the fabric does not have any metal parts on it. After applying ColorStay Dye Fixative, wrap the fabric in plastic wrap and seal the edges. Place the wrapped fabric on a paper towel in the microwave and heat for 2 minutes. Plastic will puff up, creating a heat chamber that helps bond the dye with the fabric. Once the microwave is done, remove the fabric and open the plastic, letting it cool down.
11. If a microwave is not available or feasible to use and it is a hot sunny day, lay the wrapped fabric out in the sun for an hour.
12. Rinse in cold water until rinse water begins to run clear. This is very important to prevent unabsorbed dye from bleeding into any white areas. If possible, rinse with the fabric bundle sitting flat on the baking rack. If it is held vertically, some of the unabsorbed dye could run into white areas as it is rinsed off.
13. Carefully remove rubber bands with a scissors and unfold the fabric.
14. Wash in cold water with a mild detergent, rinse and dry.