Canvas Wall Banner

SUPPLIES & TOOLS:

• Canvas Fabric: 1 yd
• 7/16" Extra-Large Eyelet Kit
• Basic Sewing Supplies
• Heat Transfer Vinyl: White & Cutting Machine or White Felt
• SVG or PDF: Adventure is Calling

DIRECTIONS:

1. If cutting words by hand, download the 'Adventure is Calling' PDF by clicking on the "GET PATTERNS" tab above.
2. Cut canvas to 20"x 26".
3. Fold edges in 1/2" & press with iron.
4. Fold edges in another 1/2" & press with iron.
5. Pin in place.
6. Sew around the edges, 1/4" from the folded edge.
7. Make a mark 1 1/2" from the top & 1 1/2" from the side at the top two corners.
8. Install the eyelets following the kit instructions at the marks.

For heat transfer vinyl:

9. Load SVG to cutting machine software.
10. Cut words from heat transfer vinyl & weed away extra material.
11. Center on the canvas banner & apply with an iron or heat press according to the materials setting instructions.

For felt:

12. Cut letters from felt using pdf pattern.
13. Cut letters can be applied with fabric glue or sewn into place, 1/8" from the letter edge.
14. If sewing into place, a glue stick is helpful to hold the letters in place.

JOANN HACKS:

• Press deep creases by spritzing the canvas with water before ironing.
• To reduce the fabric bulkiness at the corners, unfold the edges & cut off the squares at each corner along the creases.