**It is important when working with resin to work in a well-ventilated area, keep gloves on, and wear a mask with extended use!**
Mix Color Pour Resin & Hardener according to instructions. Pour a small amount of resin into a mixing cup and add crushed glass - the resin should just coat the crushed glass. Split the remaining resin equally into five mixing cups. Keep one clear, make one gold, make one white, and create a pale pink and mauve color in the other two (or any desired shades).
Place resin molds onto a craft mat and pour crushed glass in a line diagonally across the tray mold where desired, and in the center of each coaster mold. Add stripes of color to tray and circles of color to the coasters working out from the crushed glass. Adding clear between colors helps to isolate the color and make it stand out, but don't be afraid to experiment.
Keep pouring stripes & circles until the mold is full, then let resin cure for 24 hours.
Drill holes in fully cured resin tray and add hardware included with mold.
JOANN HACKS:
It's best to pour the tray and coasters at the same time if you are mixing your own colors to ensure that they match well.