SUPPLIES & TOOLS:
DIRECTIONS:
JOANN HACKS:
- 1 16"x 20"
frame with glass in it - 1 piece of fabric 2" bigger than the
frame 18"x 22" - 1 roll of duct tape
- 1 can of adhesive spray
- 1 roll of white adhesive vinyl
Cricut machine- 1
Cricut tacky transfer roll - 1 piece of thin cardboard the size of the inside of the
frame - Large ruler
- Masking tape
- Writing pen
DIRECTIONS:
- Remove glass and backing from
frame . - Spray the cardboard backing board with the adhesive spray. Apply the fabric to the sticky board and wrap edge around to the back.
- Place the backing board on top and reinsert into the
frame . - Flip the
frame over to measure the front of the glass. - Size your phrase or quote in Design Space and cut out of the adhesive vinyl.
- Transfer the vinyl to the tacky transfer roll one line on one piece of transfer tape. You will have one strip for each line in the phrase.
- On the front of the glass, measure where you want the phrase to be. Mark the placement with the masking tape.
- Place each strip
according to where you marked with the tape.As you are placing each strip make sure you are putting it on slowly and rubbing it down to prevent air bubbles. - Rub it onto the glass and then slowly remove the transfer tape.
JOANN HACKS:
- Start from the top down when placing each row.