Dyed Cricut Treat Everyone with Kindness Tee

by JOANN |

Item # 222223365P81
Beginner Weekend Project

SUPPLIES & TOOLS:

  • Raglan with White Center and Black Sleeves
  • Rit Dye: Green, Yellow
  • Plastic Tub
  • Water
  • Gloves
  • Plastic Bag
  • Black Cricut Everyday Iron-On Vinyl
  • Crict Maker or Cricut Explore
  • Green Cricut Mat
  • Cricut Heat Press

DIRECTIONS:


  • To download the SVG files, to load directly into Cricut Design Space click on the links below.
  • TREAT EVERYONE WITH KINDNESS SVG Click Here

  • DYING THE TEE:
    1. Add water and some green and a little yellow dye to a plastic tub. Dye test the color with a scrap piece of fabric to make sure it's the desired color. Add more green or yellow dye or water to adjust the color.
    2. Wet garment with plain water and ring out excess water.
    3. Submerge the shirt in the dye bath. Remove and ring out any excess dye.
    4. Place the shirt into a plastic bag to sit overnight.
    5. Remove the shirt from the bag and rinse out with plain water until the water runs clear.
    6. Wash & dry each piece as normal alone as to prevent dye affecting other clothes.
    7. After the first wash it can be washed with other colored clothes.

    CRICUT VINYL DESIGN:
    1. Measure your t-shirt working space. For this size adult S shirt it was 8x 8 inch working space.
    2. Open Design Space.
    3. Insert TREAT EVERYONE WITH KINDNESS image.
    4. Size approx to 8"x 8" and attach.
    5. Insert black vinyl shiny side down into mat.
    6. Mirror your image before cutting.
    7. Cut with the Cricut and follow on-screen instructions.
    8. Weed your cut vinyl.
    9. Press with Cricut Heat Press using temp guide according to your t-shirt material.
    10. Use Heat Transfer Guide for correct settings Click Here
    11. Place weeded image shiny side up and press.

    JOANN HACKS:

    • Pre-wash and dry shirt before for vinyl to last the longest.

    More Project Ideas