Easter Flower Pot

SUPPLIES & TOOLS:

• Cricut Wild Rose Explore Air™ 2 OR Cricut Maker™
• Cricut™ standard grip machine mat
• Cricut™ weeder
• Cricut™ transfer tape
• Cricut™ adhesive foil - stainless copper/gold

DIRECTIONS:

1. Go to this project on Cricut Design Space™ to make this-
2. Design Space Link


3. One cut of this project's size is 1/2" H x 10 1/2" W. You can customize your project size by clicking "Customize" button in the bottom right of the project screen. Hit "Make It" to make the project as is. You can also choose your own color iron-on.


4. Cut
5. Place Adhesive Foil shiny liner side down onto Standard Grip Mat.


6. Select images and size, then load mat into the machine.
7. Cricut Explore: Turn the Smart Set Dial to “Custom" and select “Adhesive Foil" from the list of materials.
8. Insert Fine-Point Blade


9. Cricut Maker: Select “Browse all materials" then select “Adhesive Foil"
10. Insert Fine-Point Blade
11. Press the flashing "Go" button.


12. Assemble
13. Use the weeding tool to remove the negative pieces from each of the images, leaving the liner intact.


14. Remove the Transfer Tape liner.
15. Gently place the Transfer Tape (adhesive side down) over your design. To prevent bubbles, start in the center and move out toward the edges. Use a craft stick or the scraper to burnish (rub or polish) the tape onto the adhesive foil.
16. Peel the adhesive foil away from the liner at a 45-degree angle. If the foil sticks to the liner, simply burnish the transfer tape onto the foil, then continue to peel the foil away from the liner.