1. Projects & Learning
    2. /
  2. Project Ideas
    3. /
  3. Cricut Projects
    4. /
  4. Cricut Accessories

Engraved Leather Bottle Tags

by JOANN |

Item # 482116650P62
Intermediate 1-2 Hours
SUPPLIES & TOOLS:_x000D_
    _x000D_
  • 1 Piece of leather 3"x 1" for each label - 8 labels = 3"x 8"
    • _x000D_
  • Cricut Maker machine
    • _x000D_
  • Engraving tip - for the Cricut Maker
    • _x000D_
  • Cricut strong grip mat
    • _x000D_
  • X-acto knife
    • _x000D_
  • Cutting surface
    • _x000D_
  • Wood burner tool and fine tip
    • _x000D_
  • Masking tape
    • _x000D_
  • Leather punch
    • _x000D_
  • 2" Eye rings - (1 for each label)
    • _x000D_
_x000D_
_x000D_ DIRECTIONS:_x000D_
    _x000D_
  1. Lay out out the words on Design Space.
    2. _x000D_
  2. Place the piece of leather on the Strong grip mat and then using masking tape, tape around the perimeter of the leather on the mat to help keep it stable. Press the leather firmly in place.
    3. _x000D_
  3. Engrave the words onto the leather.
    4. _x000D_
  4. Remove leather from the strong grip mat.
    5. _x000D_
  5. With the X-acto knife and the metal straight edge, cut each names into 1"x 3" strips with the names centered on each strip.
    6. _x000D_
  6. Use your wood burner with the fine tip to enhance the letters.
    7. _x000D_
  7. Take the leather punch and make a hole at the top of the label. Insert the eye ring into the punched hole.
    8. _x000D_
  8. Insert the eye ring into the punched hole of each label.
    9. _x000D_
_x000D_
_x000D_ JOANN HACKS:_x000D_
    _x000D_
  • Be careful when using the wood burner that you don’t press too firmly. Start lightly and then you can always make it darker.
    • _x000D_
_x000D_

More Project Ideas