Fa La La Banner

SUPPLIES & TOOLS:

• Cricut Maker™ Cutting Machine
• Cricut® StandardGrip Mat 12"x 12"
• Cricut Fabric Mat 12"x 12"
• Cricut Weeder
• Cricut EasyPress™ or home iron
• Cricut EasyPress Mat or cloth
• Cricut Everyday Iron-On, black
• 1/3yd white canvas fabric
• 1/3yd black & white check fabric
• Green thread
• Sewing machine
• Black ribbon
• Grommets & setting tools

DIRECTIONS:

This project makes a project designs that is range from 40"x 6". You can customize your project size by clicking customize button in the bottom right of the project screen. Hit Make It to make the project as is. You can also choose your own color iron-on for this project as well that suits your preferences.
CUT

1. Mat 1 & 2: Add white canvas to your fabric mat.
2. Select Canvas from the materials menu.
3. Be sure the rotary blade in in clamp A.
4. Hit the Cricut go button to start cutting.
5. Mat 3: Add black iron-on shiny side down.
6. Be sure to mirror this mat.
7. Select iron-on material from materials menu.
8. Add the fine point blade to the machine.
9. Hit the Cricut go button to start cutting.
10. Mat 4 & 5: Add black and white check fabric to your fabric mat.
11. Select cotton fabric from the materials menu.
12. Be sure the rotary blade in in clamp A.
13. Hit the Cricut go button to start cutting.
ASSEMBLE

14. Remove fabric from the mats.
15. Use zig zag stitch with green thread to attache the white canvas cut to the black check cut banner.
16. Use a Weeder Tool to remove the negative pieces of iron-on so just your design remains on the clear liner.
17. Apply the iron-on layers to the white canvas using a Cricut EasyPress and Cricut EasyPress Mat.
18. Use grommet setting tools and follow manufacturer’s instructions for set grommets into each corner of each pennant.
19. Thread ribbon through the grommet corners to finish the banner.
20. Hang where desired.