Flannel Burrow Dog Bed

SUPPLIES & TOOLS:

• 2yds Flannel
• 2yds Sherpa
• 1yd Velcro®
• 24" x 36" Pet Bed Insert
• Basic Sewing Supplies

DIRECTIONS:

1. Sew 1/2" seam allowance.
2. Cut 2 ea. of sherpa for lining and flannel for outside of bed - 27" x 39"
3. With right sides together, stitch a 1/2" seam on one long side of 1 flannel and 1 sherpa piece.
4. Turn and baste the remaining 3 sides. The folded edge will be the front of the top blanket.
5. Fold to back 1/2" on one long side on remaining flannel piece and top stitch. This will be the back of bed. Set aside.
6. Layer top blanket flannel side to wrong side of 2nd sherpa piece and stitch 1/2" seam along the back.
7. You will now have a piece with sherpa facing you and the blanket section with sherpa side on back.
8. Fold the sherpa piece over so the two right sides of sherpa are facing each other. The sherpa piece is longer than the blanket front piece.
9. Place the remaining flannel piece with right side up on the table and the hem side toward you.
10. Take the section you just constructed and place it with the flannel sides together matching up the front edges.
11. Pin the right side of flannel to the right side of the sherpa piece incasing the folded front of blanket.
12. Pin sides.
13. The back of this should have the folded seam of flannel and the incased seam of sherpa and flannel of blanket.
14. Stitch 1/2" seam around the three sides being careful not to sew the front folded blanket section.
15. Turn. The finished piece should have the two sherpa sides facing each other and the flannel sections on outside.
16. Center the velcro on the inside of the two back openings and stitch in place.
17. Insert bed.