Dog Bed
_x000D_ SUPPLIES & TOOLS:_x000D_
_x000D_ DIRECTIONS:(1/2" seam allowance)_x000D_
_x000D_ Fleece Football Dog Toy
_x000D_ SUPPLIES & TOOLS:_x000D_
_x000D_ For Fleece Dog Coat Pattern
_x000D_ Click Here
_x000D_ SUPPLIES & TOOLS:_x000D_
- _x000D_
- 2yds brown fleece _x000D_
- 1yd white fleece _x000D_
- 5lbs Polyfil® _x000D_
- Basic sewing supplies _x000D_
_x000D_ DIRECTIONS:(1/2" seam allowance)_x000D_
- _x000D_
- Enlarge pattern to 19"x 30" for base of bed. Cut 2. _x000D_
- With WST, baste together. _x000D_
- Cut for sides from brown fleece: four 13"x 8", four 20 1/2"x 8". _x000D_
- Cut from white fleece: eight 3"x 8" for side stripes. _x000D_
- Enlarge pattern to 15"x 26" for pillow. Cut 2. _x000D_
- Cut one 2"x 13" from white for center stitching applique. _x000D_
- Cut five 1"x 4" from white for center stitching applique. _x000D_
- Cut two 3"-wide white strips for side applique curves. _x000D_
- Center the 2"x 13" white piece to top of pillow and stitch close to edge using a straight stitch or zigzag. _x000D_
- Evenly space the remaining five 1" pieces over first applique. _x000D_
- Pin the curved pieces over ends and stitch in place. _x000D_
- With RST, stitch around outside of pillow leaving an opening for turning. _x000D_
- Turn and stuff. _x000D_
- Stitch opening closed. Set aside. _x000D_
- Make two: Stitch the sides together as follows - 13" to 3" to 20 1/2" to 3" to 13" to 3" to 20 1/2" to 3". _x000D_
- Stitch last piece to first to form a ring. _x000D_
- With RST, pin and sew the two rings together at top matching seams _x000D_
- Turn and top stitch around 1/4" from top seam. _x000D_
- Fold the base of the bed in half lengthwise and place a pin at both edges. _x000D_
- Fold the base of the bed in half widthwise and place a pin a both edges. _x000D_
- Mark the center of the two 20 1/2" sides and the center of the 13" sides. _x000D_
- Match up the pins on the bed sides to the base and pin. _x000D_
- Stitch (1/2" seam) the sides to the base leaving a 4" opening on both of the longer sides for stuffing. _x000D_
- Turn the seams so they are on the inside of bed. These will not show when the pillow is inserted. _x000D_
- Stuff the sides through the two openings. _x000D_
- Stitch the openings closed by hand or if you can stitch on your machine. _x000D_
- Insert pillow. _x000D_
_x000D_ Fleece Football Dog Toy
_x000D_ SUPPLIES & TOOLS:_x000D_
- _x000D_
- 1/3yd brown fleece _x000D_
- 1/8yd white fleece _x000D_
- 1 small bag Polyfil® _x000D_
- Basic sewing supplies _x000D_
- _x000D_
- Enlarge pattern to 5 1/2"x 9 1/4" (approximately). _x000D_
- Cut two from brown fleece. _x000D_
- Cut two of the side curves from white fleece. _x000D_
- Cut one 3 1/2"x 1" from white fleece. _x000D_
- Cut three 1/4"x 1 1/2" from white fleece. _x000D_
- Applique the center stitching strips by zigzag or straight stitching around outside edges. _x000D_
- Applique the two side curved pieces to the edges of football. _x000D_
- Cut three each: 1"x 20" stripes from white and brown fleece. _x000D_
- Make two: pin 3 strips together and braid. _x000D_
- Fold in half and tie a knot in center of each braid. _x000D_
- Fold in half and pin to top of football. _x000D_
- With RST pin front to back and stitch leaving an opening for turning. _x000D_
- Turn and stuff. _x000D_
- Stitch opening closed. _x000D_
_x000D_ For Fleece Dog Coat Pattern
_x000D_ Click Here