Glow in the Dark Vampire Mask

SUPPLIES & TOOLS:

• 100% cotton fabric
• 100% cotton coordinating fabric 
• Pattern template (download PDF)
• Basic sewing supplies

DIRECTIONS:

1. Download the pattern by clicking "download PDF" below Print Description.
2. Cut pattern pieces from your fabric.
3. To make ties and side trim: Cut two strips of fabric 1 1/2"x 40" Cut two strips 8"x 1 1/2". Fold fabric in half lengthwise and press. Open up and bring both edges to the center fold line and press. Fold in half to make ties and side trim.
4. Match outer mask pieces right sides together and sew the outer curve. Repeat with lining pieces.
5. Open both mask halves and press both seam allowances to the right.
6. Topstitch down the center seam allowance, about 1/4" from the seam.
7. Pin front and back pieces wrong sides together, matching center front seams.
8. Baste layers of mask together using 1/8" seam allowance around the edge of the mask.
9. Sew two smaller strips to sides of mask, trim edges to make even with the top and bottom edges.
10. Center the longer ties and pin across the top and bottom edges of the mask folding over the edges and topstitching 1/4" from edge.
11. Finish tie ends by folding twice and tacking into place or knotting ends.