Halloween Tie-Dye Shirt

SUPPLIES & TOOLS:

• White Cotton T-Shirt
• Cricut® Iron-On, Black
• Cricut®
• 12" x 24" Cricut® Mat, Green
• Lint Roller
• Iron & Ironing Board
• Tulip® One-Step Tie-Dye Kit, Retro Brights

DIRECTIONS:

1. Wash and dry t-shirt, pre-washing the shirt will help hold tie-dye colors better. Following the instructions on the packaging, wet the t-shirt then flatten shirt onto workstation. Starting from the center of the shirt, twist fabric into a tight coil. Using three rubber bands create six sections (rubber bands overlap in the center). Place shirt on a cooling rack. For easy clean up line a cookie sheet with tin foil under the rack.
2. Using pink, yellow and periwinkle fill each bottle to the line on the side of the bottle. Shake until powder dissolves. Pour one color into each section. Flip shirt over and repeat using the same color in the same section as the front of the shirt. Place shirt into zip lock bag and let sit for 6-8 hours.
3. Rinse shirt until water is clear. Wash shirt alone on cold and large load with a small amount of laundry soap. Dry
4. Use the Creep It Real SVG to upload in Cricut Design Space. Adjust size to fit on t-shirt. You can make the image as large or small as you prefer. Roll out iron on with the shiny side down onto a green cricut mat. Select Iron on and turn on mirror image. Cut image.
5. Weed excess iron on from sheet. Center onto t-shirt. Firmly press iron onto image for 40 seconds and lift. Allow image to cool before peeling away from t-shirt.