Harry Potter Cotton Kid Mask

SUPPLIES & TOOLS:

• Fabric for the face mask
• Complementary fabric for ties
• Sewing machine
• Scissors or rotary cutter
• Ruler or measuring tape
• Thread
• Straight pins
• Iron

DIRECTIONS:

1. To find the downloadable pattern, click on "GET PATTERNS" tab above.
2. Using the mask fabric, cut out patterns using the cutting directions on the pattern.
3. Seam allowance is 1/4" unless stated otherwise.
4. From the complementary fabric, cut two strips of fabric 1 1/2"x 40".
5. Cut two strips 5"x 1 1/2".
6. Fold strips in half lengthwise and press. Open up and bring both edges to the center fold lines and press. Fold in half and press.
7. Match outer mask pieces right sides together and sew the outer curve. Repeat with lining pieces.
8. Open both mask halves and press both seam allowances to the right.
9. Topstitch down the center seam allowance about 1/4" from the seam.
10. Match front and back pieces, wrong sides together, nesting center front seams.
11. Baste layers of mask together using 1/8" seam allowance around the edge of the mask.
12. Apply two smaller strips to the sides of the mask, trim smaller strip edge to be even with the rest of the mask.
13. Center one long piece and pin across the top edge of the mask folding over the edges.
14. Topstitch along the edge of the tie.
15. Center the other tie along the bottom of the mask and sew.
16. Finish tie ends by folding twice and tacking into place or knotting ends.