SUPPLIES & TOOLS:
- 100% cotton fabric
- Coordinating 100% cotton fabric
- Basic sewing supplies
- Pattern template (download PDF)
DIRECTIONS:
- To create color block sew together two pieces of coordinating fabric 4"x 12" long using 1/4" seam allowance.
- Download pattern by clicking on the "Get Patterns" tab. Fold pattern in half from outer corner to center of curved side. Lay fold of pattern piece on the seam of the fabric piece you created. Cut one pattern piece.
- Lay cut pattern piece on fabric matching seam line with right sides together to cut second piece making sure you have turned the piece to make color block.
- Cut 2 pattern pieces of coordinating fabric for lining.
- Cut pieces from coordinating fabric to create bias tape. You’ll need one piece that is about 41" long and 1" wide.
- Use bias tape maker to create 1/4" bias tape or do it yourself by ironing the strap in half, then folding the two sides again to meet the center fold. Sew closed to finish bias tape.
- Match outer mask pieces right sides together and sew the outer curve making sure you match seams for color block. Repeat with lining pieces.
- Open both mask halves and press both seam allowances to the right.
- Topstitch down the center seam allowance, about 1/4" from the seam.
- Pin front and back pieces right sides together and sew around mask leaving a small opening at the bottom of the mask between the center front seam and corner to turn.
- Clip across corners, and clip curves taking care not to cut through the stitching.
- Turn mask right side out and press.
- Topstitch around the mask 1/4" from the edge, closing the hole at the bottom in the process.
- Make channel on each side of mask by turning under 1/2" and sewing close to edge. Thread bias tape through channels making loop at the top. Finish ends of bias tape by turning under and sewing or tie in a knot.
Rated 2 out of
5
by
Peanut from
Great
Tried to download patterns but it would not let me any advice on what to do
Date published: 2021-01-10
Rated 3 out of
5
by
jokumura from
Link to Print the Pattern
The "Print Project" does not work. You have to go down below to the "Get Patterns" tab.
Or try this link:
https://www.joann.com/on/demandware.static/-/Sites-joann-project-catalog/default/dwf60ad721/images/hi-res/project/pdf/392115075P350.pdf
Date published: 2020-12-13
Rated 1 out of
5
by
Cubby from
Disappointing
You can't use the print button. As usual your IT group does not check the links before posting them. Especially these days, it would be nice if you guys could get the online stuff right. The pattern should show the cut lines for the color block and the seam allowance.
Date published: 2020-12-01
Rated 1 out of
5
by
KAREN from
Can't print the pattern off the website
unable to give a review as I can't print the pattern out to be used from your website
Date published: 2020-11-23
Rated 4 out of
5
by
valleaoaks from
Printing
To print the pattern, select the GET PATTERNS link. This will open the pattern for printing.
Date published: 2020-11-23
Rated 4 out of
5
by
Southern Gal from
Christmas Patchwork Face Mask
Easy to print if you use IPad. Harder to print using Windows 10. Directions on pattern placement need to be clearer. Need a visual for beginning directions on cutting material . Great idea!
Date published: 2020-11-23
Rated 4 out of
5
by
AnaJ from
Great possibilities.
For those of you saying that you could not print the pattern, or that perhaps one needed to do this or that, I found that by copying and pasting it to a "Word" document I got it to paste and then I was able to print. I might have searched for the PDF file but did not have time to do that. Trying the old copying and paste, then paste style....:)
Date published: 2020-11-22
Rated 4 out of
5
by
Sarah from
How to print the pattern
Ignore the print project button.
1) Click on Get Patterns
2) Click Download Pattern(s)
3) Print pattern
4) Return to main page
5) Click on How To Make It
6) Highlight and copy the instructions.
7) Paste to your favorite word program and print!
Hope this helps!
Date published: 2020-11-22