PxPixel
How To Make a Sun & Rainbow Wall Art | JOANN

How To Make a Sun & Rainbow Wall Art

By Red Heart

(0.0)
ITEM # 17017260P21

How To Make a Sun & Rainbow Wall Art

By Red Heart

ITEM # 17017260P21
Print Description

Crafting Time:
Varies
Skill Level:
Beginner

DESCRIPTION +

SUPPLIES & TOOLS:

  • RED HEART® Super Saver: Bright Yellow A (1 skein)
  • RED HEART® Super Saver: Pumpkin 0254 B (1 skein)
  • RED HEART® Super Saver: Hot Red C (1 skein)
  • RED HEART® Super Saver: Perfect Pink D (1 skein)
  • RED HEART® Super Saver: Spring Green E (1 skein)
  • RED HEART® Super Saver: Blue F (1 skein)
  • RED HEART® Super Saver: Medium Purple G (1 skein)
  • 9" Paper plate in yellow
  • 9"x 12" sheet of craft foam in orange
  • 9"x 12" sheet of craft foam in yellow
  • Hole punch
  • Sharp pin
  • Tapestry needle
  • Scissors
  • Tacky glue

DIRECTIONS:

  1. Cut paper plate in half.
  2. Use hole punch to make 7 holes evenly spaced along cut side of plate, 3/8" [10 mm] away from the edge.
  3. Use sharp pin to poke 9 holes evenly spaced inside rim of plate.
  4. Cut strands of A and B approx. 2 yds long. Use tapestry needle to stitch lines between large holes and small holes, creating sun rays.
  5. Continue until you've achieved the desired density. Knot yarns on wrong side to secure.
  6. To print the templates, click on the "Download Project PDF" button (above).
  7. Use Inner Ray template to cut 7 inner rays from orange foam.
  8. Use Outer Ray template to cut 8 outer rays from yellow foam.
  9. Arrange inner rays around bottom of plate and secure with tacky glue.
  10. Arrange outer rays on top of inner rays and secure with tacky glue.
  11. Let sit until glue is dry.
  12. Cut 6 strands 24" long from each color yarn.
  13. Working with each color separately, fold yarn in half.
  14. Draw the fold through the large holes, from front to back. Draw ends of yarn through the fold and pull snug. Place a different color in each hole, as shown in photo.
  15. Steam tassels so yarn hangs straight.
  16. Trim ends of tassels even.

REVIEWS

+
<ul id="BVSEOSDK_meta" style="display: none !important;"> <li data-bvseo="sdk">bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0</li> <li data-bvseo="sp_mt">CLOUD, getReviews, 99ms</li> <li data-bvseo="ct_st">reviews, product</li> <li data-bvseo="ms">bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';</li> </ul>

SUPPLIES & TOOLS:


DIRECTIONS:

  1. Cut paper plate in half.
  2. Use hole punch to make 7 holes evenly spaced along cut side of plate, 3/8" [10 mm] away from the edge.
  3. Use sharp pin to poke 9 holes evenly spaced inside rim of plate.
  4. Cut strands of A and B approx. 2 yds long. Use tapestry needle to stitch lines between large holes and small holes, creating sun rays.
  5. Continue until you've achieved the desired density. Knot yarns on wrong side to secure.
  6. To print the templates, click on the "Download Project PDF" button (above).
  7. Use Inner Ray template to cut 7 inner rays from orange foam.
  8. Use Outer Ray template to cut 8 outer rays from yellow foam.
  9. Arrange inner rays around bottom of plate and secure with tacky glue.
  10. Arrange outer rays on top of inner rays and secure with tacky glue.
  11. Let sit until glue is dry.
  12. Cut 6 strands 24" long from each color yarn.
  13. Working with each color separately, fold yarn in half.
  14. Draw the fold through the large holes, from front to back. Draw ends of yarn through the fold and pull snug. Place a different color in each hole, as shown in photo.
  15. Steam tassels so yarn hangs straight.
  16. Trim ends of tassels even.