PxPixel
How To Make A Unicorn Costume | JOANN

How To Make A Unicorn Costume

(0.0)
ITEM # 36810886P135

How To Make A Unicorn Costume

ITEM # 36810886P135
Print Description

Crafting Time:
1-2 Hours
Skill Level:
Intermediate

DESCRIPTION +

SUPPLIES & TOOLS:

  • 1 Zucker Feather Products® Pink Mix Chandelle Boa
  • 1 Zucker Feather Products® Pink Marabou Boa
  • White Hoodie sweatshirt & sweatpants
  • 2 sheets of pink felt
  • 2 sheets of white felt
  • Safety pins
  • Scissors
  • Hot glue gun & glue sticks

DIRECTIONS:

  1. Cut an oval out of the pink felt sheet and hot glue it onto the front of the sweatshirt, refer to photo.
  2. To print the patterns, click on the "Download Project PDF" button (above).
  3. Using the ear pattern, cut out 2 ears from the white felt.
  4. Using the ear pattern, cut 2 pieces of pink felt about 1/2" smaller than the white felt and hot glue on top of the white felt ears, for the inside of the ears.
  5. Using the horn pattern, cut out the horn from the white felt. Hot glue it together. Stuff the inside of the horn with some of the remaining white felt for stability.
  6. Cut the remainder of the pink felt into strips and wrap around the unicorn horn securing with hot glue.
  7. Hot glue the unicorn horn on top of the hoodie in the center towards the front. Fold the ears at the bottom and hot glue. Then hot glue each ear on each side of the horn.
  8. Measure and cut a piece of pink marabou boa and hot glue it around the base of the horn.
  9. Cut the pink chandelle boa in half. There is a cord in the middle of the boa that holds it together. Spread the feathers apart and cut the cord. One half of the boa will be used for the tail and the other half for the mane of the unicorn.
  10. Fold one piece of chandelle boa in half and safety pin the center cords together approximately every 4". The safety pins won’t show because the feathers are so fluffy. Safety pin one end securely to the top back of the sweatpants for the unicorn tail.
  11. Fold the other piece of chandelle boa in half and safety pin the cords together approximately every 4", using the safety pins to attach the boa to the center of the hoodie starting at the unicorn horn and ending at the bottom. This is for the unicorn mane.

REVIEWS

+
<ul id="BVSEOSDK_meta" style="display: none !important;"> <li data-bvseo="sdk">bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0</li> <li data-bvseo="sp_mt">CLOUD, getReviews, 64ms</li> <li data-bvseo="ct_st">reviews, product</li> <li data-bvseo="ms">bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';</li> </ul>

SUPPLIES & TOOLS:


DIRECTIONS:

  1. Cut an oval out of the pink felt sheet and hot glue it onto the front of the sweatshirt, refer to photo.
  2. To print the patterns, click on the "Download Project PDF" button (above).
  3. Using the ear pattern, cut out 2 ears from the white felt.
  4. Using the ear pattern, cut 2 pieces of pink felt about 1/2" smaller than the white felt and hot glue on top of the white felt ears, for the inside of the ears.
  5. Using the horn pattern, cut out the horn from the white felt. Hot glue it together. Stuff the inside of the horn with some of the remaining white felt for stability.
  6. Cut the remainder of the pink felt into strips and wrap around the unicorn horn securing with hot glue.
  7. Hot glue the unicorn horn on top of the hoodie in the center towards the front. Fold the ears at the bottom and hot glue. Then hot glue each ear on each side of the horn.
  8. Measure and cut a piece of pink marabou boa and hot glue it around the base of the horn.
  9. Cut the pink chandelle boa in half. There is a cord in the middle of the boa that holds it together. Spread the feathers apart and cut the cord. One half of the boa will be used for the tail and the other half for the mane of the unicorn.
  10. Fold one piece of chandelle boa in half and safety pin the center cords together approximately every 4". The safety pins won’t show because the feathers are so fluffy. Safety pin one end securely to the top back of the sweatpants for the unicorn tail.
  11. Fold the other piece of chandelle boa in half and safety pin the cords together approximately every 4", using the safety pins to attach the boa to the center of the hoodie starting at the unicorn horn and ending at the bottom. This is for the unicorn mane.