Emoji Drawstring Bag
Item #
14810881P52
SUPPLIES & TOOLS:
DIRECTIONS:
- Emoji print flannel – each bag needs two pieces 7-3/4" high by 7-1/4" wide
- 1/8" ribbon – 2 pieces 22" long
- Basic sewing supplies
- Large safety pin
- Sewing machine
- Iron & pressing surface
DIRECTIONS:
- Finish all edges of the fabric pieces with an overcast stitch.
- With right sides of the flannel print together sew across the bottom (7-1/4" side) and up the sides to 2" from top edge using a 1/4" seam allowance.
- Turn the unsewn side edges to the back 1/4" and sew up to the top edge. Turn right side out and press.
- Fold the top 1" on both sides to the inside, press and sew to make a casing.
- Put the two pieces of ribbon through all the way around the casing. Tie the ends of the same ribbon together to form a loop. Be sure the knotted end of one ribbon is at one casing opening and the other ribbon’s knot on the other casing opening. When the knots are pulled the ribbons close up the top.