1. Projects & Learning
    2. /
  2. Project Ideas
    3. /
  3. Paper Crafts
    4. /
  4. Die-Cutting

Cricut Infusible Ink Projects

by JOANN |

Item # 261934709P68
Intermediate Varies

My Little Canvas Tote

SUPPLIES & TOOLS:

  • Infusible Ink™ Transfer Sheet, Mermaid Rainbow
  • StandardGrip Machine Mat - 12" x 12"
  • EasyPress 2 - 12" x 10"
  • EasyPress Mat - 12" x 12"
  • Infusible Ink™ Tote Bag Blank
  • Lint Roller
  • Tweezers
  • White Cardstock
  • Heat Resistant Tape (optional)
  • Butcher Paper
  • Scissors

DIRECTIONS:

  1. If you want to alter the project, select Customize, then use the tools in the Edit panel to make changes before you cut.
  2. To personalize the text of this project, use the text tool to select the text you want to change, and type in your desired letters. Use the 'Attach' option to preserve the arrangement of text before cutting.
  3. Be sure to Mirror the mat when using an Infusible Ink™ Transfer Sheet and place the shiny side (clear liner) down on the mat.
  4. Follow the prompts in Design Space® to cut the images from the Infusible Ink™ Transfer Sheet.
  5. For your Infusible Ink project, follow the links below to determine the settings and stack order you should use for your project.
  6. Preheat Cricut EasyPress 2 to 385°F.
  7. Place mat inside tote bag.
  8. Insert cardstock on top of mat inside tote bag to prevent bleed through.
  9. Lint roll tote bag.
  10. Cover tote bag with butcher paper larger than heat plate.
  11. Preheat tote bag for 15 seconds.
  12. Remove butcher paper from top of tote bag.
  13. Place design face down, liner side up.
  14. Cover with clean butcher paper larger than heat plate.
  15. Press with light pressure at 385°F for 40 seconds.
  16. Slowly lift press.
  17. Slowly remove butcher paper.
  18. Slowly remove liner while warm. Note: If transfer sheet remains on shirt, remove with tweezers.
  19. Machine wash inside out with cold water and mild detergent.
  20. Tumble dry low or line dry.
  21. Do not use fabric softener, dryer sheets, or bleach.

Donut T-Shirt

SUPPLIES & TOOLS:

  • Infusible Ink™ Transfer Sheet, Mermaid Rainbow
  • Infusible Ink™ Transfer Sheet, Ultra Violet
  • Infusible Ink™ Transfer Sheet, Rose Pink
  • StandardGrip Machine Mat - 12" x 12"
  • EasyPress 2 - 12" x 10"
  • EasyPress Mat - 12" x 12"
  • Cricut® Women's T-Shirt Blank
  • Lint Roller
  • Tweezers
  • White Cardstock
  • Heat Resistant Tape (optional)
  • Butcher Paper
  • Scissors

DIRECTIONS:

  1. If you want to alter the project, select Customize, then use the tools in the Edit panel to make changes before you cut.
  2. Be sure to Mirror the mat when using an Infusible Ink™ Transfer Sheet and place the shiny side (clear liner) down on the mat.
  3. Follow the prompts in Design Space® to cut the images from the Infusible Ink™ Transfer Sheet.
  4. For your Infusible Ink project, follow the links below to determine the settings and stack order you should use for your project.
  5. Preheat Cricut EasyPress 2 to 385°F.
  6. Place t-shirt on clean mat.
  7. Insert cardstock inside t-shirt to prevent bleed through.
  8. Lint roll t-shirt.
  9. Cover t-shirt with butcher paper larger than heat plate.
  10. Preheat t-shirt for 15 seconds.
  11. Remove butcher paper from top of t-shirt.
  12. Place design face down, liner side up.
  13. Cover with clean butcher paper larger than heat plate.
  14. Press with light pressure at 385°F for 40 seconds.
  15. Slowly lift press.
  16. Slowly remove butcher paper.
  17. Slowly remove liner while warm. Note: If transfer sheet remains on shirt, remove with tweezers.
  18. Machine wash inside out with cold water and mild detergent.
  19. Tumble dry low or line dry.
  20. Do not use fabric softener, dryer sheets, or bleach.

Tropical Coasters

SUPPLIES & TOOLS:

  • Infusile ink™ Transfer sheet, Tropical Palm
  • Laser Copy Paper
  • StandardGrip Machine Mat - 12" x 12"
  • LightGrip Machine Mat - 12" x 12"
  • EasyPress 2 - 6" x 7"
  • EasyPress Mat - 8" x 10"
  • Infusible Ink™ Pen, Neon Green
  • Infusible Ink™ Pen, Bright Green
  • Cricut® Ceramic Coaster Blanks
  • Lint Free Cloth
  • Tweezers
  • White Cardstock
  • Heat Resistant Tape (optional)
  • Butcher Paper
  • Scissors

DIRECTIONS:

  1. If you want to alter the project, select Customize, then use the tools in the Edit panel to make changes before you cut.
  2. Be sure to Mirror the mat when using an Infusible Ink™ Transfer Sheet or Pens and place the shiny side (clear liner) down on the mat.
  3. Follow the prompts in Design Space® to cut the images from the Infusible Ink™ Transfer Sheet or laser paper.
  4. Insert your Infusible Ink™ Pens or Marker into the machine when prompted.
  5. For your Infusible Ink project, follow the links below to determine the settings and stack order you should use for your project.
  6. Preheat Cricut EasyPress 2 to 400°F.
  7. Wipe tile with lint-free cloth.
  8. Cover mat with cardstock to protect surface.
  9. Position design on coaster.
  10. Place coaster with design face down on cardstock.
  11. Cover with clean butcher paper.
  12. Center machine, press with no pressure at 400°F for 240 seconds without moving press.
  13. Lift press.
  14. Remove butcher paper.

CAUTION: Coaster will be very hot. Let cool completely. Remove coaster from design. Wash with warm water and glass cleaner.
Do not use steel wool, colored cleansing agents, or scrubbing pads.

More Project Ideas