SUPPLIES & TOOLS:
- Sewing machine
- Sewing notions
- Rotary cutter & cutting board
- Iron
- Poly-Fil
- 20"W x 4' 6" L Flex-Foam 2-Sided Fusible Stabilizer
- 58" W x 1 1/8yd Industrial Felt
DIRECTIONS:
- Enlarge and cut all parts.
- Cushion: Bottom, fuse WS of one fabric oval to foam oval. RST sew 4" side to bottom. Start 1/2" from short end of side, match at center of 5" flat section of oval. Match quarters of oval with quarters of side length minus 1" on side (1/2" SA). Sew 1/2" from raw edges stopping 5" from start leaving an opening to turn. Match top, fabric only, to sides RST, same as bottom. Sew completely around edges. Sew short ends of side RST 1/2" SA. Clip to 1/4" from all seams except at opening. Turn RSO. Fill. Tuck raw edges in at opening to match seam and hand stitch closed.
- Bed frame: Fuse foam to WS of side lining up top edges. Fuse foam to WS of front lining up top edges. Layer foam bottom oval between two fabric ovals, WS of fabric facing foam. Foam oval centered on fabric, 1/2" from fabric edges. Fuse. Baste 1/4" from edge.
- Place fabric sides RST lining up top edges. Sew 1/2" SA short sides and top. Trim seams to 1/4". Turn RSO. Press. Baste 1/4" from bottom edge.
- Place fabric fronts RST lining up top edges. Sew 1/2" SA short sides and top. Trim seams to 1/4". Turn RSO. Press. Baste 1/4" from bottom edge.
- Fold bottom in half and mark points on outer edge. Fold in half matching the marked points to locate quarter points. Fold the side in half lengthwise and mark. Mark points 13 3/4" from center both sides at bottom edge. RST match back center point on bottom (center of 5" flat length) with center point on side. Match side quarter marks on bottom with 13 3/4" marks on side. Ease side to bottom between the marks and to the front. Sew 1/2" SA. Fold front in half lengthwise and mark. Find the center of the opening between the short ends of the side panel. RST match the center point of front with the center point of the front of the bottom. The front will overlap the side. Sew 1/2" SA. Trim seams to baste stitch. Turn RSO.
- Hand stitch side overlap to front. Start at bottom edge on outside and sew up to top edge of front. Continue stitching on inside of side at top of front.
- Set pillow in bed frame with flex foam side down. This will ensure that the pillow will keep shape without sacrificing a soft cushion.
Rated 1 out of
5
by
AMSm from
Not enough instruction
The first step starts with enlarge the pattern without any information on how to do that. Second, they do not offer a link or site to purchase materials; and I did not see any abbreviation list. I am disappointed in this and will not be doing it.
Date published: 2021-04-05
Rated 4 out of
5
by
alice22 from
Looks great! I am going to try this soon
Ok, I just stumbled on the pattern projects area on the site and have not so far tried any of the projects. However, this looks nice and with extra time now while we WFH I am going to gather supplies up and try this and a few other projects.
Date published: 2021-03-06