SUPPLIES & TOOLS:
- Everyday Iron-on™, Pink
- Glitter Iron-on, Fluorescent Pink
- Glitter Iron-on, Pink
- Party Foil, Pink
- Foil Iron-on, Rose Gold
- StandardGrip™ Machine Mat, 12"x 12"
- Cricut EasyPress™, or Household Iron & Press Cloth
- Cricut EasyPress™ Mat
- Weeder
- Needle & Thread, or Hot Glue
- Canvas Shoes, White
- Long Sleeve Shirt, White
- Tutu, Pink
- Leggings, White
- Pressing Form (also known as a pressing ham, optional, for leggings)
- Mini Iron (optional, for shoes)
- Cricut BrightPad Go™ (optional)
DIRECTIONS:
Go to this project JELLYFISH COSTUME (available on Cricut Design Space)Approximately 3"x 4.5" (7.62 cm x 11.43 cm ) 4.5"x 5.5" (11.43 cm x 13.97 cm) , 7.5"x 9.5" (19.05 cm x 24.13 cm) and 6"x 8.5" (15.24 cm x 21.59 cm)
-
PREPARATION
- If you want to alter the project click "Customize," then use the tools in the Edit panel to make changes before you cut.
- Be sure to Mirror the image when using iron-on and place the shiny side (clear liner) down on the mat.
- Follow the prompts in Design Space® to cut the images from the iron-on material and party foil.
- Use a Weeder tool to remove the negative pieces so just your design remains on the clear liner.
- Apply the iron-on layers to your project using a Cricut EasyPress™ and Cricut EasyPress Mat with our Interactive Guide, linked below, for the perfect time and temp settings; or use a household iron or heat press and a press cloth.
- Use a pressing form, or pressing ham if available, to apply the iron-on to the leggings.
CUT
ASSEMBLE
JOANN HACKS:
- A pressing ham is a tightly stuffed pillow used as a curved mold when pressing any curved area of clothing. Pressing the leggings on a curved form will allow them to better fit body contours.
- Use the tip of an iron or a mini iron to apply the iron-on images to the shoes.
- To make the tentacles, sew or glue the Party Foil streamers into the tutu, securing them near the waistband for maximum strength.