SUPPLIES & TOOLS:
DIRECTIONS:
- Cricut Joy Machine
- Cricut Joy Card Mat
- Cricut Joy Tool Kit
- Cricut Joy Insert Card Set - Sensei
DIRECTIONS:
- Go to this project on Cricut Design Space to make this-
- Design Space Link
- Preparation
- Place card on Cricut Joy™ Card Mat.
- TIP: If you have never used Cricut Joy™ Card Mat before, check out this link - https://help.cricut.com/hc/articles/360040664534
- Cut.
- Insert Cricut Joy™ Blade when prompted to cut the images from the card.
- Then below project copies, by Type, select Insert Card.
- Hit continue in the bottom right corner to continue the cut.
- Select "Your Joy Machine" from Connect Machine. Select Cricut device drop down if you're connected via Bluetooth.
- Select Insert Card for your material.
- Click "go" on the screen to start cut.
- Once cut is finished, hit unload.
- Assemble
- Insert the coordinating card insert into the corner cuts one at a time until all corners are aligned and the insert lays flat inside the card.
- Write a message & enjoy!
Rated 1 out of
5
by
Craftster from
Wrong link
The link takes you to a thank you card. Very unprofessional.
Date published: 2022-01-09