Kid’s Room Chunky Letters with EasyPatterns Plus

SUPPLIES & TOOLS:

• 11.8"x 36" Siser EasyPatterns Plus HTV, Tie Dye
• Siser Weeder
• Park Lane Wooden Chunky Letters (name of your choosing)
• 24 pkg Wilton 10"x 15"Candy Melt Parchment Sheets or Other Cover Sheet
• 9" x 9"Cricut EasyPress™ or Home Iron & Ironing Board
• Scissors
• Pen or Marker
• Optional: Siser Heat Transfer Tape

DIRECTIONS:

1. Place EasyPatterns Plus Tie Dye pattern side down onto table.
2. Place Park Lane Wooden Chunky Letter face down onto EasyPatterns Plus Tie Dye.
3. Trace letter using a pen or marker.
4. Cut out letter with scissors.
5. Align the cut HTV onto the wood letter with the Tie-Dye facing up, place parchment sheet on top, and press with EasyPress at 335F with medium pressure for 10-15 seconds. Remove carrier sheet.
6. Repeat above steps with remaining letters until complete.

JOANN HACKS:

• The key is achieving even pressure when pressing the HTV onto the wood letters. If the HTV peels up with the carrier, replace carrier and press again for a few seconds. Even though EasyPatterns Plus is a hot peel, allowing the adhesive to cool a little before peeling the carrier sheet off may help.
• Use Siser Heat Transfer Tape to hold the HTV securely in place on the wood letters while pressing.
• All time, temperature, and pressure settings for heat applying Siser HTV can be found at SiserNA.com. Add an additional 30F to our recommended settings anytime you are using a Cricut EasyPress.