MLB WEIGHTED TABLECLOTH
ITEM # 1865877P21
MLB WEIGHTED TABLECLOTH
ITEM # 1865877P21
Print Description
Crafting Time:
1-2 Hours
Skill Level:
Intermediate

DESCRIPTION +

SUPPLIES & TOOLS:

  • Tablecloth Fabric – Yardage to be determined by the table size.
  • Pockets – 1/2 yd. – Contrast
  • Drapery weights – 8
  • Medium rickrack – 1 pkg.
  • 3/4" Velcro™ – 3"
  • Sewing machine
  • Basic sewing supplies
  • Disappearing ink pen
  • Clear plastic ruler

DIRECTIONS:
  1. Measure the length and width of the table. Determine the size of the drop you want, double that amount plus 1" for hems. Add that amount to the length and width. The length will determine the yardage needed. For instance, a 24"x48" table with a 12" drop will require fabric approximately 49" x 73", which translates to 2-1/8 yds. If the table is very wide, double the amount of fabric.
  2. To make the pockets, cut 4 squares 8"x8"on a diagonal. With wrong sides together, fold the squares in half to make a triangle and press.
  3. Stitch the rickrack to the back side of each pocket along the pressed edge. Cut the Velcro into 4 – 3/4" pieces. Stitch the soft side of each Velcro™ piece just below the rickrack to the center back of each pocket.
  4. Place the triangle pockets on the corners of the tablecloth and mark where the rough side of the Velcro should go. Stitch the rough side of each piece of Velcro to each mark.
  5. Stitch each triangle to the right side of the tablecloth corners lining up the raw edges and stitch along the two raw edges of each corner.
  6. Use a double fold hem along the edges of the tablecloth.
  7. Insert 2 weights in each corner.
  1. LARGE TABLES:Follow step #1 but you will need to double the yardage.
  2. Cut the fabric into 2 equal pieces. For example if you needed 6 yards cut the fabric into 2- 3 Yd. pieces. Set aside one of the pieces to use for the center of the tablecloth.
  3. Cut the second piece of fabric in half lengthwise. (Ex. 2 – 3 yds. x 29" pieces.) These are the tablecloth sides.
  4. With right sides together, stitch 1 side piece from Step 10 to the tablecloth center, along the long edges. Repeat with the second side piece on the opposite center piece.
  5. Fold the fabric in half lengthwise on a flat surface, lining up the seams. Measure and mark from the fold, across the fabric, 1/2 the width you want your table cloth to be. Cut along your markings through both layers. Open out tablecloth and press.
  6. Follow step # 2 through # 7 to finish the tablecloth.

Items
Brother Xl2610 Sewing Machine
By Brother
ITEM # 9627852
$157.49
QTY
Please enter a value greater than 1 Please enter a value less than 1000000 item(s) in stock
Some coupons are not applicable - details
St. Louis Cardinals Cotton Fabric 58''-Tossed Print
ITEM # 14304422
$8.39/yd Reg. $11.99
Entire Stock Fabric Sale - Online Only Deal
YARD(s)
Please enter a value greater than 2 Please enter a value less than 10 item(s) in stock
2 YARD MINIMUM
10 yard maximum
St. Louis Cardinals Cotton Fabric 58''-Patch
ITEM # 14304414
$8.39/yd Reg. $11.99
Entire Stock Fabric Sale - Online Only Deal
YARD(s)
Please enter a value greater than 2 Please enter a value less than 10 item(s) in stock
2 YARD MINIMUM
10 yard maximum
Wrights Medium Rick Rack-1/2''W x 2-1/2yds
By Wrights
ITEM # 8108979
$1.99
$1.99
$1.99
$1.99
$1.99
$1.99
$1.99
$1.99
$1.99
$1.99
$1.99
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Black
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Bright Pink
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Canary
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Candy Pink
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Copenhagen
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Emerald
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Hot Pink
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Leaf Green
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Purple
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Red
Wrights Medium Rick Rack-1/2\u0027\u0027W x 2-1/2yds, Yale
+ SEE MORE COLORS
— SEE LESS COLORS
Please select an option before adding to your bag
QTY
Please enter a value greater than 1 Please enter a value less than 1000000 item(s) in stock
Collins Vanishing Fabric Marker Purple
ITEM # 2177178
$4.99
QTY
Please enter a value greater than 1 Please enter a value less than 1000000 item(s) in stock
Design Ruler
By Dritz
ITEM # 13059522
$3.99
QTY
Please enter a value greater than 1 Please enter a value less than 1000000 item(s) in stock
VELCRO Brand 0.75'' x 30'' Sew-On Tape
By Velcro
ITEM # prd3162
$3.99
$3.99
$3.99
$3.99
VELCRO Brand 0.75\u0027\u0027 x 30\u0027\u0027 Sew-On Tape, Beige
VELCRO Brand 0.75\u0027\u0027 x 30\u0027\u0027 Sew-On Tape, Black
VELCRO Brand 0.75\u0027\u0027 x 30\u0027\u0027 Sew-On Tape, White
+ SEE MORE COLORS
— SEE LESS COLORS
Please select an option before adding to your bag
QTY
Please enter a value greater than 1 Please enter a value less than 1000000 item(s) in stock
Dritz Drapery Weights 1" Square With Tab-4/Pkg
By Dritz
ITEM # 1842087
$3.99
QTY
Please enter a value greater than 1 Please enter a value less than 1000000 item(s) in stock

SUPPLIES & TOOLS:


DIRECTIONS:
  1. Measure the length and width of the table. Determine the size of the drop you want, double that amount plus 1" for hems. Add that amount to the length and width. The length will determine the yardage needed. For instance, a 24"x48" table with a 12" drop will require fabric approximately 49" x 73", which translates to 2-1/8 yds. If the table is very wide, double the amount of fabric.
  2. To make the pockets, cut 4 squares 8"x8"on a diagonal. With wrong sides together, fold the squares in half to make a triangle and press.
  3. Stitch the rickrack to the back side of each pocket along the pressed edge. Cut the Velcro into 4 – 3/4" pieces. Stitch the soft side of each Velcro™ piece just below the rickrack to the center back of each pocket.
  4. Place the triangle pockets on the corners of the tablecloth and mark where the rough side of the Velcro should go. Stitch the rough side of each piece of Velcro to each mark.
  5. Stitch each triangle to the right side of the tablecloth corners lining up the raw edges and stitch along the two raw edges of each corner.
  6. Use a double fold hem along the edges of the tablecloth.
  7. Insert 2 weights in each corner.
  1. LARGE TABLES:Follow step #1 but you will need to double the yardage.
  2. Cut the fabric into 2 equal pieces. For example if you needed 6 yards cut the fabric into 2- 3 Yd. pieces. Set aside one of the pieces to use for the center of the tablecloth.
  3. Cut the second piece of fabric in half lengthwise. (Ex. 2 – 3 yds. x 29" pieces.) These are the tablecloth sides.
  4. With right sides together, stitch 1 side piece from Step 10 to the tablecloth center, along the long edges. Repeat with the second side piece on the opposite center piece.
  5. Fold the fabric in half lengthwise on a flat surface, lining up the seams. Measure and mark from the fold, across the fabric, 1/2 the width you want your table cloth to be. Cut along your markings through both layers. Open out tablecloth and press.
  6. Follow step # 2 through # 7 to finish the tablecloth.