Monogram Ornaments

SUPPLIES & TOOLS:

• Cricut® Cutting Machine
• Cricut StandardGrip Mat 12"x 12"
• Cricut basic tool set
• Cricut black permanent vinyl
• Cricut transfer tape
• White ornaments

DIRECTIONS:

This project makes monogram design that is about 2 1/2"x 2 1/2". We recommend measuring your ornament prior to make sure this size will work. You can customize your monogram by clicking customize button in the bottom right of the project screen. Then use the tool menu to customize the initial. Hit Make It to make the project as is.
CUT

1. Add the black vinyl your mat. Check gridlines down on the mat.
2. Select vinyl for your cut setting.
3. Load into the machine.
4. Press Flashing Cricut button to start cut.
ASSEMBLE

5. Remove the unneeded pieces using a Weeder tool. It is usually easiest to move from the inside out when weeding.
6. Use Transfer Tape and your Scraper Tool to apply the vinyl cuts to your project. Make sure surfaces you plan to adhere to are clean and dry.
7. Peel back transfer tape, leaving the vinyl behind.