Olive Canvas Mask

SUPPLIES & TOOLS:

• Canvas fabric for outer mask
• 100% cotton fabric for lining
• Bias tape for ties
• Basic sewing supplies
• Pattern download 

DIRECTIONS:

1. To download pattern click on "Get Patterns" then click on "Download Pattern".
2. Cut 2 pattern pieces from canvas adding 1/2" to side seam of each to make channel for bias tape.
3. Cut 2 pattern pieces from lining fabric adding 1/2" to side seam of each to make channel for bias tape.
4. Match two pieces of canvas fabric right sides together, and sew the outer curve using 3/8" seam allowance.
5. Repeat with remaining two pieces of lining fabric.
6. Open pieces and press both seam allowances to the right.
7. Top stitch down the center seam allowance, about 1/4" from the seam.
8. Match front and back pieces right sides together, nesting center front seams.
9. Pin and sew around the exterior of the mask, leaving a small opening at the bottom of the mask for turning.
10. Turn mask out and press.
11. Top stitch edge of mask 1/4" from edge, closing the hole at the bottom in the process.
12. Fold both sides to back 1/2" and sew at edge forming a casing.
13. Cut one 41" piece of bias tape for tie. Turn under ends and finish.
14. Sew along open edge of bias tape to finish edges.
15. Thread bias tape through casing on sides of mask with loop on bottom of mask and tie ends towards the top of the mask.

JOANN HACKS:

• Make sure you use a needle suited for heavier fabrics when sewing on canvas.