SUPPLIES & TOOLS:
DIRECTIONS:
JOANN HACKS:
- 1 unfinished house frame
- 1 bottle of white and red acrylic paint
- 1 medium paint brush
- 1 small paint brush
- 2 small hooks from hardware store
- 1 medium dowel rod
- 1 small can of black spray paint
- Drapery hanger circles with pinchers
- 1 roll of black Siser EasyPSV Permanent Vinyl
- Cricut machine
- Bandanas - 1/2 yard of fabric for each bandana
- Iron
- Sewing machine
- Thread
- Scissors
DIRECTIONS:
- Paint the base of the house using the medium paintbrush with the white paint. Let it dry.
- Use the smaller paint brush and paint the red trim onto the edges of the house to make it look like a doghouse.
- Cut the dowel rod to be larger than the house width by 1".
- Paint it white.
- Paint the hooks black and let them dry.
- Insert the black hooks into the bottom of the red frame of the house.
- Slide the drapery hangers onto the white dowel rod.
- Slide the painted white dowel road into the hooks.
- Place the Bandanas onto the black hangers.
- Create the dog name and the black dog bone in Design Space and cut them out on your Cricut machine.
- Place the name and dog bone on the finished white house centered and near the top.
- Bandanas - Cut out a square from the fabric. Fold it right sides together on the diagonal.
- Pin the edges together.
- Sew the bandana completely around the edge, leaving a 3" wide opening.
- Reverse the fabric to right sides out.
- Top stitch the border 1/8" in which will also close the opening as well.
- Create dog name in Design Space and cut out of Siser EasyPSV Permanent Vinyl.
- Place the name as you choose on the side of the bandana and iron in place.
JOANN HACKS:
- Apply two coats of white paint to the house to make a better seal for the vinyl letter to adhere well.