SUPPLIES & TOOLS:_x000D_
_x000D_ DIRECTIONS:
_x000D_ _x000D_
- _x000D_
- Cricut Cutting Machine _x000D_
- Cricut StandardGrip Mat 12”X12” _x000D_
- Cricut Basic Tool Set _x000D_
- Cricut White Permanent Vinyl _x000D_
- Cricut Transfer Tape _x000D_
- Wood ornaments _x000D_
_x000D_ DIRECTIONS:
_x000D_ _x000D_
- _x000D_
- You can view the project here. _x000D_
- This project makes monogram design that is about .6” X 2.5”. We recommend measuring your ornament prior to make sure this size will work. You can customize your monogram with names by clicking customize button in the bottom right of the project screen. Then use the text option in tool menu to customize the names Hit Make It to make the project as is. _x000D_
- CUT _x000D_
- Add the white vinyl your mat. Gridlines down on the mat. _x000D_
- Select vinyl for your cut setting. _x000D_
- Load into the machine _x000D_
- Press Flashing Cricut button to start cut. _x000D_
- Assemble _x000D_
- Remove the unneeded pieces using a Weeder tool. It is usually easiest to move from the inside out when weeding. _x000D_
- Use Transfer Tape and your Scraper Tool to apply the bracken vinyl cuts to your project. Make sure surfaces you plan to adhere to are clean and dry. _x000D_
- TIP: If you have never used vinyl before, check out the links below in the More Help section. _x000D_
- Peel back transfer tape, leaving the vinyl behind. _x000D_
Rated 1 out of
5
by
KK33 from
Incorrect Directions
The directions seem to be for the 3D Hanging Gem Ornament project.
Date published: 2020-06-25