Personalized Yoga Mat and Accessories

by JOANN |

Item # 472234449P400

Intermediate 1-2 Hours

SUPPLIES & TOOLS:_x000D_

_x000D_
_x000D_ DIRECTIONS:
_x000D_ To download the SVG files, to load directly into Cricut Design Space click on the links below._x000D_ _x000D_

_x000D_
_x000D_ YOGA MAT_x000D_

Roll out the yoga mat and measure the working space (the area where you’d like your design).
Open the software for the cutting machine.
Insert your design or uploaded svg image.
Resize image to the measured size.
"Crush Those Stretch Goals" - 7"x 10".
"You Got This" - 7.5"x 7".
"Go For the Perfect Zen" - 8"x 10".
"Look at you, being all stretchy & stuff" - 4" x 13".
Attach any like colors.
Mirror your design before cutting.
Heat your press to 260 degrees for 30 seconds while the design is cutting.
Weed the design with a weeding hook (remove excess iron-on, leaving only the design).
Place the yoga mat on the easy press mat.
Place the iron-on design where you’d like it, staying within 12” from the edge.
Place protective heat cover sheets on top of the iron-on design.
Press carefully. Do not push down just let the press sit on top for 30 seconds.
Carefully remove the clear sheet from the iron-on.

_x000D_
_x000D_ WATER BOTTLE_x000D_

Measure the water bottle working space.
Open Design Space and insert your design svg image.
Change the size according to your water bottle (for this the size of the image is 2" x 2.5").
Attach any like colors.
Place adhesive vinyl color-side up and do not mirror adhesive vinyl.
Weed the design after it’s cut, place transfer paper over the top and smooth with tool.
Peel up from white paper and place your design onto the water bottle.
Carefully peel up the clear transfer paper.

_x000D_
_x000D_ TOTE BAG_x000D_

Measure the tote bag.
Preheat your EasyPress to 340 for 30 seconds.
Insert your design "Crush Those Stretch Goals" and resize to 6" x 9" for a tote bag that's approximately 12-14".
Attach like colors and mirror the image.
Cut with the Cricut and weed excess material.
Place your iron-on design on the tote bag.
Press with the heat press.
Carefully peel up clear paper while still a little warm.

_x000D_
_x000D_ JOANN HACKS:_x000D_

To find the center of your mat, measure the entire length and mark the center with heat-resistant tape. Measure your iron-on cutout and mark with tape as well. Line the two tapes up for a perfect center.
For visual measuring in design software, measure your yoga mat and cut that measurement in half. For example, for a 24” mat, insert a 12” rectangle, then insert your design svg within that 12" area, then double the size of the svg image before cutting.

_x000D_