Pipe Cleaner Skeleton

SUPPLIES & TOOLS:

• Pipe Cleaners
• Wood Beads
• White Pony Beads

DIRECTIONS:

1. Put a wood bead on the first pipe cleaner.
2. To make the arms fold one end of the 2nd pipe cleaner about an inch from the end.
3. Wrap the longer part of the 2nd pipe cleaner perpendicular around the 1st pipe cleaner.
4. Put 4 white pony beads over the folded end of the 2nd.
5. Fold the 2nd pipe cleaner again an inch on the other side to match.
6. Put 4 white pony beads over fold again.
7. Wrap extra from the 2nd around the middle.
8. To make the ribs put 2 white beads on the 2nd pipe cleaner.
9. Wrap around the 1st again to make one side of the ribs.
10. Put 2 white beads on the 2nd pipe cleaner to make the 2nd side of the ribs.
11. Wrap around the 1st pipe cleaner under the arms.
12. Pull the 2 pipe cleaners together down the center.
13. Put 2 beads over the 2 pipe cleaners.
14. Cut extra off the 2nd pipe cleaner.
15. To make the legs loosely fold the end of pipe cleaner 1 back to the last bead.
16. Tuck end into bead or wrap right under the bead.
17. Bend the bottom of that loop up to the last bead to make two separate legs.
18. Put 5 beads over the folded leg on the left.
19. Bend the pipe cleaner to make a foot.
20. Repeat last 2 steps for the right.