POP! Home Dec Kids Bedroom

SUPPLIES & TOOLS:

FOR TWIN COMFORTER:

• 5 1/2yds Puffy POP!™ Fabric
• Sewing Machine
• Basic Sewing Supplies

FOR PANEL CURTAINS:

• 5 1/2yds Dotted POP!™ Fabric
• Sewing Machine
• Basic Sewing Supplies

FOR BED CANOPY:

• 1 1/3yds 54" POP!™ Fabric (for Canopy)
• 4yds Butterfly Sheer Fabric
• 4oz Sugar & Cream Cotton Yarn Skein, Pink
• 4oz Sugar & Cream Cotton Yarn Skein, Yellow
• 4oz Sugar & Cream Cotton Yarn Skein, Teal
• 24"x 1" Ribbon
• 18" Wood Embroidery Hoop
• Sewing Machine
• Basic Sewing Supplies

FOR 14" X 28" ENVELOPE LUMBAR PILLOW:

• 1 1/3yds 54" Wide POP!™ Fabric
• 4oz Sugar & Cream Cotton Yarn Skein, Pink
• 4oz Sugar & Cream Cotton Yarn Skein, Yellow
• 4oz Sugar & Cream Cotton Yarn Skein, Teal
• Sewing Machine
• Basic Sewing Supplies

DIRECTIONS:

TWIN COMFORTER:

1. Cut one fabric piece as 90"x 41". This is the center.
2. Cut two fabric pieces as 90"x 15". These are the sides.
3. With right sides together, seam one 90"x 15" side piece to each side of the center piece.
4. Serge or finish seams.
5. Finish edges, slightly rounding corners.
6. Turn under 1" and hem.

PANEL CURTAINS:

1. Cut two fabric pieces as 98"x 45".
2. Hem 1" on all 98" sides.
3. Finish top and bottom edges.
4. With wrong sides together fold down 10" and press.
5. Stitch 2" from fold.
6. Stitch at bottom edge for rod pocket.
7. Fold and press bottom up 4".
8. Stitch to hem.

BED CANOPY:

1. Piece canopy fabric to make 21"x 64" piece.
2. Finish both long edges.
3. Lay out wrong side up and mark a line 6", then fold line up from bottom.
4. Mark a 2" line along both 21" sides, fold and press.
5. At top edge and between the 2" marks, place a dot every 12". Repeat on the 6" fold line.
6. RST seam 2" seam from top stopping at 12".
7. Use dot marks to pleat canopy top by folding into 5 triangles (darts) from top dots down to dot at 6" mark.
8. Add ribbon to top.
9. Cut sheer fabric in half and finish top and bottom edges.
10. Hem sides.
11. At top, overlap 15" and gather.
12. With right sides together, pin and stitch 1" from finished canopy edge, centering overlap at front and open edges meeting at back.
13. With wrong sides together, fold up at 6" fold line and stitch at edge.
14. Open hoop and insert hoop into back openings and fasten with screw.
Make and add pom poms to top edge.

14" X 28" ENVELOPE LUMBAR PILLOW:

1. Cut one fabric piece as 29"x 15". This is the front.
2. Cut two pieces 18"x 15". These are the back pieces.
3. Finish 15" center edges of both back pieces.
4. Place front Right sides up.
5. With right sides together, overlap back pieces to fit.
6. Seam all edges.
7. Turn right side out.
8. Make and add pompoms to short ends.